Baby Moon, You can stop at any truck stop and get baby moon hub cap with NO EMBLEMS dent for $5 to $10. I think they look better without the emblem.

Dr Don

If any place will have those parts it would be this place.

https://rvparts.visonerv.com/cgi-bin/welcome.pl?

Any high end coaches.

Dr Don

I would say check the fuses and relays in the power panel in basement under driver. That's where all the power comes from that supplies power to the front end of the coach.

I had the same problem. Picture #1 is the check valve that came on the coach when I got it. The hose and fitting that is on the bottom of it is the hose from the city water hose reel. There is an ARROW on the check valve that does not show in this picture. That arrow was the only reason that I knew it was a check valve. I replaced the plastic check valve with a brass one. Picture #2. I had to add a 1/2 in spacer to the bottom of the brass valve so that the coupling would push up on the check valve. The only place I could find both check valves was a RV parts stores. The Big Box stores didn't have them. Good Luck!!!

I had to buy one from VALID Manufacturers in Canada. https://validmfg.com/product/vehicle-leveling-system/

$500 + shipping

Test it first to make sure it's bad.

There are one or two fuses in side the unit. You have to take it apart to get to them. 

They are special Microwave fuses that can be bought at Lowes or HD for about $5.

Cheaper than a new Microwave.

Don

I just replaced mine a few days ago. Same thing happen to me. I needed one right away because we had no water coming into the coach.

ASCO 8210G094 12DC 

found GRAINGER had one in stock for $160. So I drove over and got it, put it in.

All fixed, the wife is HAPPY.

The only place I know is TALIN, Brooksville FL. 352-942-2653. They make and install a kit the fixes all the Monco slide problems.

www.talinman.com

Thank you, When I get the time and energy I'll have to hit it again. Its not easy to get in there.

There is no room to work. I'll try to find the lock motor. That may have been the problem all this time.

I asked LIPPERT how much a new conrtol module would cost, Guess what they told me? $2,000.

I ask her to check the price again, she came back with $2,000. UNBELIEVABLE!!!!

Hi Mark,

That was the first thing I did, pulled the lever, guess what? Would not budge a bit, not even 1/4 of and inch. Thats when I called Kwikee (Lippert)

Their engineers had no idea what to do. I can't move the tray to get at the switches or get the bolts out so that I could remove this piece of garbage.

I did check the door switches on both sides, they were working fine.

Thats where Im at now.

I would love to have a manual tray, my auto tray stopped working and now there is now way to get it in or out. My auto tray was made by Kwikee Step company and NO THERE HAS A CLUE HOW IT WORKS. There for they can't help me get it fixed. Be happy with what you have.

Woody has a point, my relays on my 2009 DYN are behind the front TV set and are separate modules that can be replaced or fixed. Check it out.

Try moving the shades that do work and have someone listen by the TV to see if they hear clicking. If you do then more that likely that maybe your problem.

Good luck.

I bet it is a MCD if it has two screws at the end. Mind did not have any marking what so ever as to the mfg. You just have to know. Pull the motor out and look for that. I think they all us the same motors. So look for number on the motor. GOOGLE the motor number.

If its MCD there is 4 clips that hole the u shaped rod up to the ceiling. Take a flat blade screw driver and push up the clips to release the rod.

Then you can remove the screws from the end of the shade.

Sounds more like a contorller problem. They usually just reverse the volage to make it go up or down. If that is the case it won't be the motor.

Also could be a programming problem. Google "programing a MCD electric shade". Try that first. I bought my shade motor on EBAY for about $25.

TALIN 352-942-2653 in Brooksville FL Specializes in MONACO's.

Try them.

Get some water hose or some kind of hose, put one end by your ear, walk around near the noise and see if it gets loader until you find where it's coming from.

Are you sure its the motor and not the switch that operates the motor?

What did he do to the panel to make it better?

The key number should be on your build list, mind is in the back closet, it should give you the key number. Then go to EBAY.com and look for a TRIMARK key dealer.

My keys were $2 a piece. 

I get 15w-40 at TRACTOR SUPPLY, 5 gallons for $27 after rebate.

Don

My compressor is located above the front axel on the drivers side. The fuses are in the electrical compartment under the driver.

Thats on a 09 Dynasty. Maybe the same for you. Not easy to get to. Good luck!!

Try Cameron's Reliable RV repair. I have had real good luck with him.

520-490-7632 He is in Tucson.

Start by rebooting your computer. Doesn't always work, but it can't hurt!!!!!!!

There is a guy in QUARTZSITE that will read all your codes for $150.

Dave's Diesel Diagnostic Service in Quartzsite, AZ. ... 1010 W Main St, Quartzsite, AZ 85346. (605) 999-0720.