Patrick
Members-
Posts
75 -
Joined
-
Last visited
Content Type
Forums
Downloads
Articles
Gallery
Blogs
Events
Store
Everything posted by Patrick
-
Does anyone have the color codes for a 2002 Dynasty Baroness with the Almond Color scheme? Or where can I find them? I looked under the driver’s seat but the only label there is for the chair. I have quite a bit of clear coat peeling on the roof of my MH. I would like to repair the clear coat but will have to respray the base color in order to get a good repair. All help is appreciated.
-
“Furnace” mode doesn’t show up on 5 button Comfort Controllers
Patrick replied to Patrick's topic in AC, Heating, and Cooling
Thanks to the help of the forum, I was able to resolve my problem with Furnace not showing up on the Living/Kitchen area Comfort Control. I got up on the roof this morning and opened up the control box on the front AC. Sure enough, the DIP switch for Furnace was not activated. When the Dometic AC unit was replaced by the PO the installer did not set the DIP switch correctly. Turned on the DIP switch for Furnace and voila, Furnace now shows up and starts up on the Living/Kitchen Comfort Control. Many thanks for all who replied! I would not have been able to figure this out on my own. Thanks to your help I was able to resolve my problem with Furnace not showing up on the Living/Kitchen area Comfort Control. I got up on the roof this morning and opened up the control box on the front AC. Sure enough, the DIP switch for Furnace was not activated. When the Dometic AC unit was replaced by the PO the installer did not set the DIP switch correctly. Turned on the DIP switch for Furnace and voila, Furnace now shows up and starts up on the Living/Kitchen Comfort Control. Many thanks for your help! I would not have been able to figure this out on my own. -
No low beams, just high beams 2002 Dynasty
Patrick replied to Patrick's topic in General Motorhome Discussion
Ok. It turns out that both bulbs were burnt out. Easy fix. Thank you to everyone for their help. I learned a lot for future reference. -
“Furnace” mode doesn’t show up on 5 button Comfort Controllers
Patrick replied to Patrick's topic in AC, Heating, and Cooling
Thanks. The bedroom thermostat does seem to be the master control unit. The other thermostat will not function unless I set it first on the bedroom one. When I set the bedroom unit on Furnace, the furnace comes on and blows warm air through the bedroom and bathroom floor vents, but not those in the main living area. I’d obviously like to get the warm air coming out the living area and kitchen vents also. Not sure what to do. I’ll be able To get up on the roof and look at the dip switches this weekend. Any advice is much appreciated. -
“Furnace” mode doesn’t show up on 5 button Comfort Controllers
Patrick replied to Patrick's topic in AC, Heating, and Cooling
Awesome! Thanks! -
“Furnace” mode doesn’t show up on 5 button Comfort Controllers
Patrick replied to Patrick's topic in AC, Heating, and Cooling
Thanks! I am unable to access the roof at the moment but will check the DIP switches when I get home. The PO did say that they recently had the AC units serviced so maybe the settings are incorrect. thanks again! -
“Furnace” mode doesn’t show up on 5 button Comfort Controllers
Patrick replied to Patrick's topic in AC, Heating, and Cooling
Yes it is. Just 10 days into ownership. Thank you. Where do I access this control board? Up on the roof or inside? -
“Furnace” mode doesn’t show up on 5 button Comfort Controllers
Patrick replied to Patrick's topic in AC, Heating, and Cooling
I got Furnace to show up and work on the bedroom controller. I had to click on zone to select zone 2 and then it showed up. The bedroom controller shows zones 1 and 2. The controller opposite the fridge only shows zone 1 and does not give me the Furnace option. I swapped the controllers around, putting the bedroom one in the main galley and vice versa. No difference. Where are the dip located and what should they be set at? Thanks for your help! Thanks for the manuals! -
“Furnace” mode doesn’t show up on 5 button Comfort Controllers
Patrick replied to Patrick's topic in AC, Heating, and Cooling
Thanks. I did the reset procedure and still don’t have Furnace as an option. The other modes remain but the set points were reset to the defaults. -
“Furnace” mode doesn’t show up on 5 button Comfort Controllers
Patrick replied to Patrick's topic in AC, Heating, and Cooling
No, I haven’t. How does one go about doing that? -
I do not get an option of Furnace on either of my two 5 button Comfort Controls. The modes I get are Off, Fan Only, Cool, Heat Pump. I have the optional Aqua Hot system which I turned on and am plugged in to 50 amp power. The Heat Pump option provides good heat but I’d like to get the furnace working for the upcoming cooler months. What am I missing? I’ve only had the rv for 10 days and I am on a steep learning curve.
-
Replacing interior Pot Light Bulbs
Patrick replied to Patrick's topic in Interior & Exterior Care & Renovations
Thanks! -
Replacing interior Pot Light Bulbs
Patrick replied to Patrick's topic in Interior & Exterior Care & Renovations
Thanks for the tip! -
Replacing interior Pot Light Bulbs
Patrick replied to Patrick's topic in Interior & Exterior Care & Renovations
Awesome help! Thanks everyone! Super useful help. Thank you! -
Replacing interior Pot Light Bulbs
Patrick replied to Patrick's topic in Interior & Exterior Care & Renovations
Thanks! -
How does one replace these pot lights? I have one that is not working. Do you pull off or unscrew the cover ring? Anybody know what the replacement bulb is? Absolute Newbie here.
-
No low beams, just high beams 2002 Dynasty
Patrick replied to Patrick's topic in General Motorhome Discussion
Thanks for your help. Much appreciated. I checked power to P1 on J12 connector and had 12 volts. Checked P2 on J12 with the headlight switch on and off. When the switch is on (pulled out) I have 12 volts at P2. That seems to be working as it should. Yes? Then I checked power across one of the low beam connectors. Power was 12 volts, so I seem to have power to the headlights. Pulled the bulb on one side. It looks possibly burnt out. Could be just a bulb issue? I just got this rig last week and cannot confirm if the low beams worked when I bought it or not. -
No low beams, just high beams 2002 Dynasty
Patrick replied to Patrick's topic in General Motorhome Discussion
Thanks all for your help. Much appreciated. I checked power to P1 on J12 connector and had 12 volts. Checked P2 on J12 with the headlight switch on and off. When the switch is on (pulled out) I have 12 volts at P2. That seems to be working as it should. Yes? Then I checked power across one of the low beam connectors. Power was 12 volts, so I seem to have power to the headlights. Pulled the bulb on one side. It looks possibly burnt out. Could be just a bulb issue? I just got this rig last week and cannot confirm if the low beams worked when I bought it or not. -
No low beams, just high beams 2002 Dynasty
Patrick replied to Patrick's topic in General Motorhome Discussion
Thanks for the guidance. Here is what my J12 connector looks like. What did you do? Splice in a new one? -
Hello, My 2002 Monaco Dynasty has no low beam headlights when I pull on the headlight switch. When I switch to high beams, the high beams come on. The previous owner swapped the originals headlight housings to an aftermarket housing. Looks like an aftermarket 1997 BMW 5 series headlight housing. I have power on both screws at the low beam headlight fuse panel in the front drivers side electrical box. Before I order a new set of headlight housings are there some other things I can check? My apologies if this has been discussed previously. I tried searching articles and posts but couldn’t find what I needed. if you could steer me in the right direction I would appreciate it.
-
Yesterday, my first day with my 2002 Monaco Dynasty Baroness, all the interior lights and overhead fans worked fine. I turned off the batteries last night and on again this morning. Now none of the interior lights work. There is no display on the AC Comfort Control 5 button controllers and the overhead fans don’t work. Everything else works. The step, step cover, shades, awning, microwave, plugins and tv work. I should mention that I am not plugged in to shore power. Inverter is on, batteries now at 93% up from 82% after running the generator. I turned off the inverter and batteries and started them all up again The battery cutoff switch and the Lights switch beside the entry door are On. I checked the Lights switch and jumpered it with no change. I cannot measure any current across it. No breakers are tripped. I can’t see any burnt out fuses. I am stumped. Looking for help! Thanks.