HJK2005
-
Posts
5 -
Joined
-
Last visited
Content Type
Forums
Downloads
Articles
Gallery
Blogs
Events
Store
Posts posted by HJK2005
-
-
Just adding to this information a bit, no pun intended, the bits are generally a square #2 or SQ2 on the bit itself. Sometimes you will find a screw that is an SQ1 but they are much more rare. Hopefully this helps someone at least a bit. Kreg and several others make a 6" SQ2 that make getting to the valance brackets much easier. Take care out there.
-
Hello Don, that is a 1/2" check valve. You have one for each zone of the Aqua Hot. They turn blue/green like that when there is a leak that allows the boiler liquid to get on the outside of the valve. You can Google "1/2" brass check valve" and there are various sources for them. Here is one link for Lowe's: https://www.lowes.com/pd/AMERICAN-VALVE-Check-Valve-Brass-1-2-in-Fnpt-Swing-Check-Valve/1000248917?cm_mmc=shp-_-c-_-prd-_-plb-_-ggl-_-LIA_PLB_142_Pipe-Fittings-_-1000248917-_-local-_-0-_-0&ds_rl=1286981&gclid=CjwKCAiA5Y6eBhAbEiwA_2ZWIYMQpNnTMIHRPQPGGxqzC_VzUZ0sDJJ7lktNoNxPilhPmXMjZZn41RoCGzIQAvD_BwE&gclsrc=aw.ds Hope this helps. Feel free to reach me directly if you have any questions. I just did a complete once over on our Aqua Hot. Happy RVing. - Jonathan
-
1 hour ago, Corkman said:
I recently purchased an RV Starlink WIFI system and was wondering if anyone had any good ideas on how to run the cable from the Startlink Antenna to the Receiver inside the coach, beside running it through a partially opened window?
Thanks,
Bill
Hello Bill, I also have the Starlink RV system and I used this gland to come through the front cap on the old cell phone antenna plate area. A little bit of Dicor type sealant under to ensure a good seal and it's very clean. This is designed for boat decks and hulls.
https://smile.amazon.com/gp/aw/d/B079Q7XYXN?psc=1&ref=ppx_pop_mob_b_asin_title
There are many options but this was the "cleanest" way I came up with. Hope whatever you decide on works out well for you. - Jonathan
Has any one hung a 12 vdc ceiling fan?
in Mods & Upgrades
Posted
Our Dynasty already had one in the bedroom. I could probably pull it down and take/post pictures of the mounting. If anyone is interested? Not 100% that it's factory but rather looks like it was. - Jonathan