Jump to content

bonfield

Email Complaints
  • Posts

    75
  • Joined

  • Last visited

Posts posted by bonfield

  1. I know thiis s a very open ended question but i have a 2004 endevour on a roamaster chassis.The brakes in regular use seem fine until you get to the actual stopping and they will not lockup or slow you down very well and in a hard braking are dangerous.Has anyone any ideas of something that may be common and comes to mind.I am a mechanic and due to health issues am not able to remove the the wheels etc.

  2. Looking for a basement storeage door for an 2004 holiday ranbler endeavor on a roadmaster chassis 40dst .The on that goes into the water hook up /not the waste/exterior color e8n04 meadowlans but any colour will do.Please let me know,

  3. 2004 endeavor rr8r .The pedal is hard when applied and it seems to brake ok but as you get closer to a halt the brakes seem like they do not have the grip or stopping power.It can get harrier if it is a quick stop and has caught me off guard a few times and i feel like i am not going to stop in time.The coach was one owner with 32000 miles when i bought it and is was wondering if the shoes were glased but i have put quite a few miles on it since i bought it,has anyone have any idea what i need to check before i do not stop in time Thanks in advance

  4. I have read the manual on the roof a/c operation and i really cant grasp the operation so i think there is a problem.When changing from zone 1 to zone 2 it does not make any difference as zone 1 is still blasting ouut cold air and never seems to tuurn off or cycle.The zone 2 seems like its partially hot and cold air.It has not been a problem as it has been over 100 degrees for months now.Could anyone explain to me the way to check this and is there a problem that need to be addressed.

  5. This in motorhome related really but it is on my motorhome.I have leds light under the body of my 2004 HR Endevour and i switch them on an off with a 120 volts remote plug in controller.I have had to replace the remote on several occasions as it works for a while then stops as if it is burned out.I am afraid to put on another one until i get this sorted.It controls two 15 feet led strips through a 120 to 12 volt step down.Any ideas Thanks

  6. All the awnings and slide toppers are made by carefree so when i decided to buy a mesh hanging screen for the awning front to try and keep off the sun went with carefree.In the instuctions i says to slot it in the channel that is on the awning but the only trouble i am having is there is no entrance at either end to be able to insert it.Anyone had the same trouble and what was your solution and its needed very quickly in these 100 degree days

  7. Yes i have used the soapy spray method and it did show leaks in the past and i repaired them but nothing i can do has shown up another leak.I have leak tested it a dozen times with no luck.Thanks for the do not do with the slime because that was the reaction i wanted.Any one got any idea where to go next.
    __________________
  8. I read where someone said if you have a small air leak in your bags you can put in tyre sealant [slime].My coach will loose all its air overnight and i found some valves seeping so i replaced them.I can not find any more leaks but it still leaks.Is it possible to put stop leak in the whole system or anything that will highlite the leak.Like the dye with freon,i know it sounds cheap but it is an inconvenience and not something that i am willing to replace all the bags for.

    __________________
  9. I have a 2004 holiday rambler endeavor and a section behind the curbside slide out is delaminating.I know why this is happening because the gutter at the top in loose.Does anyone know of a glue that will spray from the gutter and go all the way down that section.I will then put pressure on it till it adheres,looks like a pretty simple repair but i need a glue that will run down to the beltline but also cling on to the top section also.Any suggestions will be good thanks.

  10. My awning will not go out and i pulled the switch and there is no power to it,i looked for the relay and was not able to find it.There is a hole in the right front cabinet but no big enough for me to get my hand in.I was going to move it manually but it is to tight to the rv to remove the plastic end cap,i also used a 9/64 allen key but i cound not find the connection through the hole.Checked fuses etc but everything seems ok.Where next

     

×
×
  • Create New...