Jump to content

Burgboy

Members
  • Posts

    45
  • Joined

  • Last visited

Everything posted by Burgboy

  1. Hey there, thank you for the reply. I am a fulltimer, 1200watts of solar. Here is my model number.
  2. After noticing some mold growing in the corner of my fridge, I washed and sprayed everything in there down with bleach water. I was thinking if I could add a UV strip or replace the door ajar bulb with a UV unit. Has anyone done this? What "size" is the dometic bulb anyway?
  3. So I went down to see the generator muffler and noticed its missing a bolt. I add a bolt and theres still a problem gap. I understand im supposed to get some kind of gasket. This looks like damage, not sure if anyone knows what i could use as filler?
  4. Yep its definitely wet, i think im taking a saw to it next weekend unless anyone has any idea where the leak might be otherwise. The hose fitting behind the fridge seems to be in the floor
  5. 6 months No I wasnt aware of it That is the cooling fin drainage loom as you can see its not split
  6. Heres inside of my slide.... and the underside of the fridge it looks like the rot is in front of the fridge and not from the slide. Directly under the fridge only has a little bit of rot Are the pipes literally under the floor? Or should they be visible behind the walls
  7. I do hear my pump running every 5 minutes if i leave it on There is space under my fridge
  8. Thanks for the reply, how should i go about finding the source of the leak? Would it be at the center of the rot?
  9. Just noticed a soft spot in front of my fridge thankfully its confined to a limited area. 1/2 pex repair and floor replacement in my future it seems. What is recommended to replace the rotted wood?
  10. Just noticed a soft spot in front of my fridge thankfully its confined to a limited area. 1/2 pex repair and floor replacement in my future it seems. What is recommended to replace the rotted wood?
  11. So, I've started looking at the jacks. Control panel turns on but it doesnt do anything. No sounds, accessories are on on the dash. Where do I start?
  12. Any idea where to start diagnostics? Will provide pictures in just a minute
  13. I've noticed when its quiet in my coach that the pump turns on for a fraction of a second every few minutes. Is this indicative of a leak somewhere?
  14. Got the Camco installed thank you very much... I've only had nonperishables in for some time now. So I actually have 2 sets of 18g wire going from inverter to 12v. AFAIK the 12v is only used for ignition Close up of the two sets of wires, just something field expedient until I get a real job.
  15. Sounds expensive. I'm fulltiming in a 1999 making $15 an hour in LA
  16. I bought a 5 gallon from the gas station... cant figure out how to put it in my coach tank
  17. Thanks I didnt know what an absorption fridge was. Im on shore power at the moment. Any idea where to check to see if its working? I think my readings here is just residual temperature from before i ran out of propane
  18. So i've just run out of propane I guess. I thought dometics ran on 12v. To my surprise its a 2 way 110v OR propane not a 3 way 110v,12vdc, or propane. I rigged up an inverter, 400 watt constant 800 w peak. In the picture I have the fridge's original 12v wire going to the inverter and routed two 18 awg wires from the inverter posts to the 12 v input on fridge. Peak power from the fridge seems to be too much for the inverter, once the ac compressor kicks on instant overload warning. Will this set up work once the fridge is at temperature? Anything look or sound unsafe? Perhaps inverter being so close to the propane tube?
  19. They look similar.... will they work? If not, does anyone know of one that will? Trimark says The part number for a compartment handle assembly keyed to TM500 with a single plunger is 12054-37. One of mine that are intact
  20. Anyone mount a bike rack on the front? My coach is a 1999 La Palma. The idea is to have something like you see on a city bus
×
×
  • Create New...