Rick Hall
-
Posts
4 -
Joined
-
Last visited
Content Type
Forums
Downloads
Articles
Gallery
Blogs
Events
Store
Everything posted by Rick Hall
-
Thanks Tom, Thats some good advice and information. I have some homework to do I see. I'm going to go get into this and report back. Again, thank you!
-
The overflow tank is full and that's where the sensor is located. I have blue fire and the code says 111-18 Coolant is low. However, tank is full. Engine is not overheating and is running all normal temps. I'm assuming the sensor is bad that's why I wanted to know how to bypass or jump it. Not sure which wires to jump since it has three Prongs / wires in the connector. Also, there are no leaks and not running hot. All temps in range and are fine.
-
Hello, I have a 2009 Camelot with a Cummins ISL 425. My low coolant on the display and Check Engine Light is on but, overflow tank is showing at the full max level with engine hot or cold. I'm on the road in AZ currently and looking to see if I can bypass this to get back home and troubleshoot / repair? The sensor is a three wire! Because the check engine light is on the engine has derated to 70%. That extra 30% would be nice on pulling these grades here. Any thoughts? Ideas would be appreciated. Thanks, Rick
