Jump to content

FunTripsUSA

Members
  • Posts

    32
  • Joined

  • Last visited

Posts posted by FunTripsUSA

  1. 1 hour ago, Tom Cherry said:

    if you are referring to your owner's manual, there were always discrepancies as Monaco made runniing floor chanes and the assemblers never told the engineers and tech support group that wrote the manuals.  your year isnot avalable online so i cant download and comment.

    fWIW, Monaco went bankrupt in 2009, but Navistar bought them and most of the tech support folks that knew the "Monaco products were rehired. As Navistar played around with the company, they realized they were in over their heads.  REV bought it for the name and brand recognition.  then, they closed all the factories and used the names and put them on existing Chassis.  Your motorhome chassis and assembly died 10 years ago.  REV has some prints....we may have more here.  we have more tech support help than any REV peson....as they are lookin at prints and have no real concept of the 2003 Dynasty wiring concept.

    perhaps some 2003 owner can look in their manual.

    you will need to learn how to read prints and understand circuits....otherwise, find a good tech and make him your new best friend.

    What type of Tech would I be looking for? 

    Do you know of any repair centers that may be able to help?

  2. 4 minutes ago, FunTripsUSA said:

    I found on page 204 of the 2003 Monaco Dynasty wiring diagram, with the link you provided, the three circuit boards.  However my circuit board P/N does not match what is in the diagram.  The part number on my coach is 16616257 and what is on the diagram is 16616143.  Does that matter?  

    I compared the fuses in my picture to the wiring diagram and they are in the same sequence. 

    page 183 does not match page 204.  How do I decode this?

  3. 8 minutes ago, Dr4Film said:

    Look toward the end where it shows the circuit boards in the FRB. I think with some patience and process of elimination you will figure it out.

    I found on page 204 of the 2003 Monaco Dynasty wiring diagram, with the link you provided, the three circuit boards.  However my circuit board P/N does not match what is in the diagram.  The part number on my coach is 16616257 and what is on the diagram is 16616143.  Does that matter?  

    I compared the fuses in my picture to the wiring diagram and they are in the same sequence. 

  4. 47 minutes ago, DavidL said:

    I will guess that the wires to the right that have the solderless connectors used to plug into that burnt connector.

    Use the wiring diagram to be sure.

    The connector on the circuit board has 4 wires in the back of the hole.  There are only 2 butt/solderless connectors to the right and those wires go down to a black box below the circuit board.

    19 minutes ago, jacwjames said:

    Agree on the butt connectors as probably being the wires attached to the circuit board. 

    You will have to get the wiring diagrams as Dr4Film suggested and try and decipher this out.  Also take a close look at the wires, on my coach most of the wires actually were labeled as to what they were for.  I was able to figure out what a couple unlabled relays in my front drivers side run bay.  You might have to try and use a wire tracer to track the wires.

    Also, I looked at the inventory of Visione RV in KY, they have a 2003 Dynasty (fire damaged) but the front drivers side bay looked unscathed.  You might call them and see if they have the board.  The don't usually list specific boards but if that coach is still there I'm sure they'd get the board.  Give them a call, if you actually talk to someone you might get lucky.  The board itself can be removed fairly easy, all the wiring harness come off and the larger wires just come loose. 

    Thank you.  I messaged them this morning.  I'll keep you posted.

    58 minutes ago, Dr4Film said:

    Ian,

    There is a file in the download area which has the wiring diagrams for a 2003 Monaco Dynasty.

    I would download that to your PC and peruse through that to see if you can find your answers.

    Wiring Diagrams - Bill D’s Monacoers

    Truth to be told is I do not know how to read a wiring diagram.  I did download the 2003 Dynasty wiring diagram.  Thank you for the link.  I will do my best to figure it out.  Will the diagram show me the configuration of the circuit board? (meaning will is have a diagram of the circuit panel and fuse amps?)

    36 minutes ago, Dr4Film said:

    Look for Fuse numbers F-20 through F-17 on the wiring diagrams once you find the correct fuse board.

    I found those numbers on the middle circuit board.  I have a total of 3 circuit boards.

  5. I have a 2003 Monaco Dynasty Diplomat and I have discovered that one of the three control fuse boards has had a short of some sort. Unfortunately the sticker that shows what all the fuses are for is gone. I called Monaco Coach however they do not have the records for my coach. I am hoping someone has the same set up we have. I found on this site another fuse diagram however the fuse amps are different from mine. Here is a link to what I found 

     

     

     

    My Exhaust Brake is not working. Here are some pictures of my control board that has damage.  I also so far cannot locate the wires that were cut from the harness. 

    20230310_105958.jpg

    20230310_105946.jpg

    20230310_105938.jpg

×
×
  • Create New...