rustykramermetalfab

Just my experience. I installed Koni's on the front of my previous coach. 2000 36' Dynasty. I thought the ride was a bit harsh. On my 2006 I am going to try the Source Bilsteins when I get to that project.

Thanks for the info, everyone. I got it done.

Yea as far as I know only one....

No I removed the Stat to do the flush based on info I read on IRV2.

Can anyone advise how many flushes of their cooling system they are doing to obtain clear or near clear water? I have been running the coach with the dash heat on. I have flushed 6 times, coolant color is still in the water after draining. Still looks like a heavy concentrate to me. Any thoughts? 400 ISL

I have a similar system to Mikes vacuum deal, called Air lift. I think it was $140.00ish. I did the first water fill and flush and it worked awesome. I will also say that the C-Low Fab aluminum expansion tank is worth changing out to. My hoses were all junk. My small hoses all crack when bent so don't overlook those.

Oh wow thank you Rick! not going to do that!

OK thanks for the information, Doc so it will circulate with the switch but just not be warm unless the AH is running.

I am ready to fill my system with water for the first flush after changing all hoses in the engine bay. I have the dash heat on and read to turn on the AH engine pre heat if I have it. Well I have it, so my question is does the AH need to be running on diesel for the pre heat to circulate. I would think it would need to be up to temp before it would circulate but just checking since I do not have any experience with AH engine pre heat. 2006 Dynasty ISL 400. Aqua Hot model AHE-100 04S I will be installing new thermostat.

I think I would start by having her read these responses. I have a friend with a nice 2014 American Revolution. I have driven it, stayed in it overnight a few times, and I like it, but I don't think I would trade it for my 06 Dynasty. If your paint is in good shape and you like the colors a serious interior remodel might be worth looking into?

I am getting ready to change my coolant out to Peak final charge. Not sure exactly the type Global or not? I have been searching but not really sure based on what I see on the web. 2006 Cummins ISL 400. Plan to flush with Distilled water in between. I am going to change out all hoses. thanks

Paul. It did for my 06 Dynasty. Not sure what to advise..

DL Open the Heavy Duty tab and you will see all kinds of coach mfgs.

Yea I found the Dayco info. Just no way to verify the size, just gotta have faith! thanks

I am looking to change coolant and want to replace all the hoses I can. Looking and found some dayco part numbers supposedly for the 2006 Dynasty daycoaftermarket.com but no diameters of the hose listed. If there is a listing of the proper part numbers on Monacoer's I have not located it. Can anyone advise ID of the hoses? It would appear measuring that the OD is somewhere around 2.750 I have not pulled any just not ready to do that yet. I would like to have everything ready once I start this project I just don't want to have a batch of hoses that are all 1/4" wrong. Thanks for any help guys.

If you watch the video the tech uses a system called Airlift. Slick deal. If you do your own coolant change out its paid for. I just ordered one from Ebay for $110.00

Thanks but I think those are rear radiator coaches. Dynasty is a Side Radiator.

I am just looking for suggestions on purchase. I know Cummins would have a stat, but anyone bought hoses from a good online source or just go to my local auto parts with some dimensions? Not really familiar with the silicone hoses. Not sure if they are worth it on a coach? I am just planning a coolant change after the season and I want to have everything ready as much as possible. I for sure want to replace the large hoses while I have it drained.

Has anyone found an online/youtube video of the detail of how to properly flush a coach coolant system in a coach? I have read a lot but just not sure I fully understand how it is being done. I am to dumb to understand what I read, I need to see it.

I am not going to argue about Res VS JC upgrade. I had JC install the new 12V upgrade while on a trip this spring. It works really well cools down quickly and stays cold. There seem to be happy campers with both residential and conversions done by JC.

Ivan Thanks I will check it when I can, I guess it is no big deal. Black tape for now!

I was leaving a campground early this morning and my Park brake indicator light would not go out. I verified with a slightly unlevel site that the coach would roll in neutral when I let off of the brake pedal. Indicator flashes when driving. Coach seams normal in every way. I am not sure where the sensor is I just got parked for the night but wanted to message the group about it. 2006 Dynasty. Thanks!

I had no idea if my seal was working or not. You can pull the hose that goes to the seal off of the barbed fitting on the electric switching valve. Just use a regulated air supply below 5PSI to see if the seal is leaking. (If you are an old school mechanic like me your mouth will work). If it has a big rip you are probably done but some owners have repaired them with a tire tube repair kit I believe I have read in the past.. It will depend on the location on the hole and how bad it is.

I have some samples from Shade pro and another company. Sorry cant remember the name of the "other one" but the material was like a soft scotch brite pad. I didn't really like it. The shade pro was much nicer top material and has a thick rubber backing. It did take a LONG time to get the sample from shade pro. I have not pulled the trigger on an order but I was going to go with the shade pro. guess I better order soon.

Well Cummins is actually a customer of mine I have some contacts that I am going to see if they can shed light on this. If Monaco figured it out somehow they will never know, but I will make a few phone calls next week to see if I can get any help from them.