thompson_skip

Ivan it does look like yours. There are two of them. I haven’t had a chance to see which one clicks when the ignition key is switched on.  Thanks 

Thanks to ALL for your reply’s. Where can I get a new solenoid? 

Sometimes when I turn the ignition switch to the run position and before I turn it to start, none of the dash lights come on.  I turn it back to stop position and then turn to run and then the dash lights come on and I start the coach. While retuning on our last trip,  while driving the lights went out, the vent fan stopped, and  the rear camera went out. The engine continued to run, but dash lights were off. I stopped, turned off the coach, then turned back on and everything was back to normal.   A friend said he thinks it is the accessory side of the ignition switch which is wearing out.  The vendor list states that the ignition switch part # is GM 29C9.  Does anyone have a suggestion where to get a new ignition switch or a current part number for the switch?
 

Skip Thompson 

2003 Monaco Dyansty 

Thanks so much for the links. Looks like they are what I will need. 😀  

I will check into having a shop make me a tray if I can’t rebuild my tray. Thanks 

Looks like these would work to let replace the broken ones on my current batty tray.   Thanks so much for the link. 

Thanks so much for your insight and I look forward to that form of power.   “Live Long and Prosper” 😬😬😬

4 hours ago, Ivan K said:

Isn't it easier to just replace the bearings and not worry about fitment? Or is the whole tray just eaten up beyond repair. I fixed ours but it may not be the same.

It is the rollers, one side won’t come out all the way. The other side has come out of the track and the bearings have fallen out. I’m have trouble finding the right side tray so I may need to rebuild my tray. Thanks 

I’m cleaning my 4 6volt house batteries on our great 2003 Dyansty. The bearings on the roll out tray are broken. I’m looking for a new tray. Any ideas where I can find one?  Thanks 

1.  2003 Dynasty. Norcold 4door

2.   No

3  We have an appointment to do the  JC Refrigeration hobo In September when we are in there area. My wife loves the wood on the  Norcold

I have gotten into the access before, but didn’t know what to look for. I will give it another try. Thanks so much.  

Thanks Steven. The gauges all work but they don’t light up. So I assume the bulb is bad. Sounds like I can replace the bulb if I can  remove the gauge. Any idea how to remove the gauge? 

I have several Dash gauges oN our 2003 Dynasty that have stopped working. Is there anyway to fix them