My front diagnostic plug in the drivers area doesn't work. 2003 Monaco Executive, I believe its because the wires from the plug are installed to the Trip tek. That does still work. I want to remove the wires and install them to a female black j1939 data link connector. Because I have a silver leaf that I would like to use.. The rear j1939 plugs works perfectly, but the front plug is a j1708 and does not work. I need a j1939. So taking the wires off the Trip tek I'll need to have some idea what is what. That is way I'm looking for an installation manual for the Trip tek 3100-x
Thanks for your help

New price$150.00

Is this what you are looking for?

https://www.ebay.com/itm/266161386181?hash=item3df87472c5:g:YmsAAOSwr1ZjCZqL&amdata=enc%3AAQAIAAAA4MztOqfYV5LbkFmGx2re1toIZqcv5zMMdJ4h6c%2F8KpkIkavSTAT5HiwjSdlRQ0HLU4zN%2FTNK78SLPx8QuKOjC%2BvIWHb%2FWSOEWML0A7EVwsUUot7H3%2F9Uinm6Qwm5GIO53GtU3aHkh0IwD8j75WUj4itnTttSboacDS6m9aq%2F5kRw9v8y42x1VnIAgEd7882KKcSbJtVp5Pe13f%2BIfFYKdYF07sQkHssanwMle5AUPWIti0MHRxFvYQEoBD2D%2F2Jc5IRwU9Aa3FHjaW1pDROtHJO%2B90iwlSZQCkH4qJKiSJXX|tkp%3ABk9SR8bDjbSDYg

Roadmaster Crossbar-Style Base Plate Kit- Removable Arms 524447-4

All hardware and Removable Arms included. Will work with or without Ecoboost and With or without Adaptive Cruise Control. Check with Roadmaster web site.  I can box it and take to UPS store, buyer pays shipping cost $250.00 OBO

Hi

Just bought this silver leaf for our motorhome 2003 Monaco with ISM cummins. Any members using one or information about  recommending  a good lap top or tablet that would be a good plug and play for the silver leaf. I was thinking around an 10 inch. Also a good mount .

Thanks

MHRookie

 when you do find out let us know. I have the same front axle.

Thanks Ivan K 

Thanks,

I have something making a sound very fant sound (screeching sound)  when my engine temperature is around 195 or higher. And the check gauges light comes on and off  very fant as well. My engine does not go over 210 when going up a steep grade. What is the normal operating heat range for a 2003 ISM? Any ideas what to look for?

Anyone have an idea what this is Monaco # 16614690 KIB# SC1198-5

My front one did the same thing. I plug in the rear and ran a 50 foot Ethernet cable to the drivers area and hook it to the scan D gauge. 

I have heard  some good things from DC Custom 500 Hyder Road Inmam South Carolina 864 978-9754 

http://dccustomsautopaint.com/

Bill

keep this post going . I'm thinking about going the same way you are.

21 hours ago, Steven P said:

Any way I could ask you to post a pic of it on your coach?  My drivers rear bay is 110v only.

Hope this will help.

Just now, Steven P said:

Thank you.  I haven't seen one of those on my Diplomat.  I'll keep an eye out.  

I never would of though it had anything to do with it. I was talking with pwhittle and he suggested changing it out. An wow it was fixed

1 minute ago, Steven P said:

I'm not familiar w one of those.  Any chance you have a pic? Thank you 

Just like this one.

https://www.digikey.com/en/products/detail/triad-components-group/ACB-12-H-30A/11580705?utm_adgroup=Circuit Breakers&utm_source=google&utm_medium=cpc&utm_campaign=Shopping_Product_Circuit Protection_NEW&utm_term=&utm_content=Circuit Breakers&gclid=Cj0KCQiAlMCOBhCZARIsANLid6YF626UnkaGa7tjrlrl8258X1T3AyTahCBEegCsJvoKcQBK0zUmhOgaAuJ4EALw_wcB

15 hours ago, Steven P said:

Which breaker was it?  

It was the driver side rear run panel. Mini breaker labeled VOLT REG 30 AMP

I had the light come on after an alternator repair. I changed out the relay for the ALT light. I didn't have any luck with that. I changed out the circuit barker in the rear panel. That fixed the problem.

 Rvhydronics site with Roger Berke sells these.  Mine was leaking around the base of the filler neck. I put one on mine. Fix my problem. I didn't even take the cover off. The bottom clamp is a shrink wrap hose clamp.

You have a part number on your muffler?

Chargerman

I'm following this because i'm going to be doing the same thing  soon. I know i'll be needing the CAC. Plus looks like my transmission  cooler is in the radiator.  Hopefully later. I appreciate how detailed you have been with pictures and places where you have made you purchases for parts. Please keep us up to date 

I don't think it will help. But I will put it out here. I have a Scangauge D  that did not work on the front plug. It did work on the rear plug just fine.    After calling Scangauge D  support. They told me I could return it. Or buy a 50 foot Ethernet cable and run it off the rear port. Being that one did work that is what I did. No problems works great.

Might want to rethink this. You won't be happy having to deal with the tow dolly.  I did have a tow dolly this is the one I did have  The KarKaddy SS folding one. When we bought the Yukon and started to flat tow. I'll never go back with a tow dolly.  Just my 2 cents

https://www.demco-products.com/rv-towing/tow-dollies/karkaddy3

I have hear problems when having the Detroit engine as an option. I would think that the ISX is just as heavy.  I have not seen or heard of any issue with the ISM.

Great information. Please keep us informed.

Thanks