Onthego

On 10/21/2022 at 10:04 PM, rschley said:

I am running on 20 amp power with the Monaco 2005 parked at my home. AQ panel shows no heat from electric element. Is the unit under powered or does the element need replacing?  

 

https://www.grainger.com/product/2E754?gucid=N:N:PS:Paid:GGL:CSM-2295:4P7A1P:20501231&gclid=CjwKCAjw79iaBhAJEiwAPYwoCLh4YUoCr26uzGmBOLETCQCagwvr4YbIlv_m1TDfw1YLpBnfOvytcBoCkM4QAvD_BwE&gclsrc=aw.ds

I have no idea if these would work if you order a set.  https://www.alibaba.com/product-detail/Hot-Sale-Replacement-Auto-Rear-Lights_1600397293040.html?spm=a2700.7724857.0.0.60ef7870NsCByi

Have fun take you time ,day lite is almost 24 hours in June-July. 

Just replace the drain hose on are 2006. When to Lowes and purchased 3’ of PVC pool 1 1/2” hose + to 2 , 1-1/2-in x 1-1/2-in dia Adapter Adapter PVC Fitting Item #23903Model #436015RMC.  Just sawed the hose 2” to 4” from the old fittings, and unscrew  I use a strip wrench. Installed the new fitting using tape seal and glued the hose to the fittings (PVC glue).   

If the list get any longer he going to need to have a truck and a trailer Follow him. 

NO problem, we have the same toothbrush’s and charger. Are inverter is a PSW. 

Thank you all, Merry Christmas.

I agree with Bob on the chose of meter. I bought an inexpensive meter from Amazon that was a surprise, it measure DC  current very accurately next to my Fluke. Maybe I will add a link to the meter check it out $39.

https://www.amazon.com/dp/B01N014USE?psc=1&ref=ppx_pop_dt_b_product_details

Have you read the Spec. I’m not Positive  but I think it’s a little deeper and also the height from the top down I think it’s a little bit bigger to.

Weights & Dimensions

• Power/Ratings

  120V / 60Hz

  Amp Circuit

  15 amp

  Power Consumption (Microwave)

  1700W

  Power Cord Length

  1000mm

•  

  Product Dimensions

  29 7/8” x 16 15/16” x 16 19/32"

  Product Weight

  75.2 lbs

Found this a good read on understanding VGT (Variable Geometry Turbo) What Fails

https://www.dirtydieselcustom.ca/blogs/cummins/turbo-failure-on-your-6-7l-cummins-here-s-what-you-need-to-know 

Maybe the shop didn’t get wires connection plugged back correctly if they took any apart. Hopefully it human error.

Out west in Oregon (Portland area ) diesel is $2.70 gal. Out side areas you can fine it $ 2.59 not at the truck stop. 

I see you already checked IRV2

Checking the manual, is some help, see  pages 37 & 38. Page 39 till how to clear codes

https://www.scangauge.com/wp-content/uploads/documentation/sgd-1-0/SGD_UM_101.pdf

still looking to fine more information 

I would shop for one that is rated to 150PSI. Looking on the internet they run from $130. And up. Now much room can you give up.? Size may play a part on which model will fit.

LIKE I SAID TRY A TRAILER PARK

https://www.google.com/search?client=safari&channel=iphone_bm&q=Remington+Park+Fort+Drum,+NY&ludocid=5338910660817989836&lsig=AB86z5UxMdbHrlfkh8LfwsG954u-&lqi=ChpUcmFpbGVyIHBhcmsgRk9SVD5kcnVtIE5ZLkjntN3j4quAgAhaOgoPdHJhaWxlciBwYXJrIG55EAAQARAEGAEYAhgDGAQiGXRyYWlsZXIgcGFyayBmb3J0IGRydW0gbnmaASRDaGREU1VoTk1HOW5TMFZKUTBGblNVTXdMVGQyU1hKblJSQUI&phdesc=CA-6dV-7sWY&sa=X&ved=0ahUKEwjHjt29hZ_sAhUJuZ4KHUFhD1kQyTMIpAEwCQ&biw=1112&bih=692&dpr=2

I WOULD LOOK FOR A TRAILER PARK ALSO. 

Reading the spec. About the installation it call for 2.0 Inch from the back wall for air, because you have a outside service door with vent opening it would be a good idea to leave one row open to make up for 2” air space required. Someone asked how close to a side wall about opening the doors. 

”We recommend about 2" on the sides to open the doors 90 degrees if installed next to a wall.”  

Looks to be a nice Model

May life be good on your new adventures. 

It could be a latching relay in the transfer switch box will require testing with a volt/ohm meter.

If shore power is present  the coil on the power relay closes contacts sending voltage to the Inverter and the fuse box. There is a power relay for the generator it wont latch if shore power is present. Or it could the reverse, 

You could add a small pure sine wave inverter. Something like this would work.

https://www.ebay.com/itm/Power-Inverter-Pure-Sine-Wave-600W-12V-to-110V-120V-USA-Transistor-4-5m-Remote/233206441245?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D2%26asc%3D20160908110712%26meid%3D7fa714cbddec472cae35e2a38536d5d5%26pid%3D100677%26rk%3D4%26rkt%3D30%26mehot%3Dnone%26sd%3D233166862279%26itm%3D233206441245%26pmt%3D1%26noa%3D0%26pg%3D2386202%26algv%3DSimplAMLv5PairwiseWeb&_trksid=p2386202.c100677.m4598

Sound like you have your bases covered 

Good luck

After you win in court then you can till all of use to avoid that shop.  

Correct me if I’m wrong. 

I didn’t see were you said that you confronted the shop about there bad repair. Hopefully you did, and ask them to correct the problem repairs. 

Best to not name names on the form,  use private e-mail. That is my own Opinion. 👀 

?Did you have to pay someone else to redo the the work. And would they be willing to go to court for you.(you may have to pay them for there time to go to court.  Pictures of the bad work and pictures of the correct work. 

I vote to go Phil advice.