Onthego

Here are a couple more pictures 

https://katu.com/news/local/gallery/three-hurt-in-crash-on-i-205-near-stafford-rd#photo-1

This was a few days ago happen on I205 off I-5 thought Portland  three people inside all when to the hospital (no word on there condition) and there 3 dogs  make it out alive.  

Interesting. 

From  Prestolite/Leece-Neville 

The following instructions are to be used for modifying standard alternators for use with Duvac Systems.

http://www.prestolite.com/pgs_support/duvac.php

If you don’t buy from Toastmn  you can try https://www.azrvsalvage.com/used-rv-parts.html

On my 2004 Cayman I had to remove the trim to adjust the door, and the top rail screws had pulled out somewhat so they need to be tightened as well. If I remember correctly did it from the bedroom side. 

That may be a error code 

https://www.slideshare.net/mobile/darlincolladodejesus/allsamsungfaultcodes

this one is better

http://support-cacyber.samsung.com/cacyber/popup/iframe/pop_troubleshooting_fr.jsp?idx=878967&modelcode=RF32FMQDBSR/AA

I found this one 

https://www.summitracing.com/parts/wlk-21969?seid=srese1&gclid=CjwKCAjw9vn4BRBaEiwAh0muDLWSNuCX4uRS_fKehcbjM5ordXIIWESdB08q2ZX7qXFgguIztuh42hoCljwQAvD_BwE

Reading the spec. On the two muffler the inlet and outlet are different the first one say the inlet & out are 4” the other one say 2.5” . I would call tripletruck parts.

? Is your muffler 4” side inlet  and the outlet also 4” 

page 98  list muffler for Cummins model and hp  

https://www.donaldson.com/content/dam/donaldson/engine-hydraulics-bulk/catalogs/Exhaust/North-America/F110028-ENG/Exhaust-Product-Guide.pdf

You can use a tablet as a video monitor at about 1/2 the cost of a 12 volt video monitor. Back a few years this was brought up on IRV2 as a replacement for the monitor. Nothing to do with a DVR. 

Just trying to be helpful Rich

If I remember correctly you need a dazzle adapter to display the video on a tablet .   Try doing a search on the internet ( how to use dazzle video capture ) maybe it will help you fine something that will work.

Remember induction burner use about 1800 watts , when set on highest setting. There are some that are around 1500 watts. Just thinking about wiring size and fused If built in.    

? Could it be that the rope light is 110-120 volt circuit and you tripped the GFI plug or like mine the gfi is built into part of the circuit breaker.

https://static.graybar.com/content-resource/image/qo230gfi-square-d-schneider-electric-88242797/993056-portrait_ratio1x1-300-300-f0b47af3948cf5a454649b769fe1df7a-RB.jpg

Thank you . It’s  close will save some time when needed 

If someone has A file with the wiring schematics for a 2006 Beaver Monterey that would share I would love to have a copy 

Thanks ahead of time Rich  

Just type on your internet search box a b video switch box. If you have more then two cameras type in  3 way video switch box.  Some come with a remote 

? Is this a video switch or is it a switch just to supplier power to turn on a camera that you are looking fore.

Your switch is most likely a  DPDT momentary contact switch .  If you take your finger off the button the switch goes to off when push in or out. The  switch that Jerry  posted didn’t do that .  Check it out before you order.  I’m only based what I’m saying  on my slides switch how it works.

Here one that mite work  and it’s white https://www.amazon.com/SEACHOICE-White-Rocker-Switch-Momentary/dp/B000N9R880

Kenwood radio with GPS are rated above average.  Trying to fine one that fixes the opening is the challenge.  

If you take the cover off there isn’t much to see. I don’t see that dumping a any kind of lubricant down from the top will make it’s way to the cable roller bearings. Sorry I didn’t take more pictures. If you do removed the cover I would just put back plastic rivets.  Here is a link to the ones I used.

https://www.amazon.com/dp/B01913JEKS?psc=1&ref=ppx_pop_dt_b_product_details

If you don’t want to built your own you could buy this cord with adapter and a polatarity test and you will have the same thing.

https://www.amazon.com/dp/B07V1J9BD5/ref=sspa_dk_detail_7?psc=1&pd_rd_i=B07V1J9BD5&pd_rd_w=GsNVy&pf_rd_p=48d372c1-f7e1-4b8b-9d02-4bd86f5158c5&pd_rd_wg=0jCu5&pf_rd_r=B3JECTPJNYPVKT6TFBH8&pd_rd_r=2b45ca3d-b289-4067-9b11-a869a3c4b1af&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzWEM1RktUODlTSUwmZW5jcnlwdGVkSWQ9QTA2MDAwMjExN0NCSkZXWktBSDVPJmVuY3J5cHRlZEFkSWQ9QTAxOTg1MTUySEdONTJKWEE3OEUzJndpZGdldE5hbWU9c3BfZGV0YWlsJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

https://www.amazon.com/dp/B07L4QVFQQ/ref=sspa_dk_detail_1?psc=1&pd_rd_i=B07L4QVFQQ&pd_rd_w=tnCGJ&pf_rd_p=a64be657-55f3-4b6a-91aa-17a31a8febb4&pd_rd_wg=EBeRm&pf_rd_r=0RYJZQMYBB6DV351V3BP&pd_rd_r=49f589ca-4b92-45f4-9cec-a1b87445912e&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzS0hJR1ZNRzJNWU1PJmVuY3J5cHRlZElkPUEwMDI1NjY1M0dNTjJPOFdIVzJHJmVuY3J5cHRlZEFkSWQ9QTEwMjQ1NzEySFhSRU41OUhMWkJJJndpZGdldE5hbWU9c3BfZGV0YWlsX3RoZW1hdGljJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

 Inspection of the Plug prongs for sure, both male and female.

 Just unplugging the cord and reinstalling it could have corrected the problem for a time.  

You may want to inspect  the ground connection .

This may sound a little funny. Is it possible that fresh air coming into the cabin compartment is turning the fan blade causing the motor bearing to squeak?  You said it stop working.  Wild thought, cannot explain for the speed, something have to be just right to happen.  

If your model look like  this it was only make a few years the tanks were make of plastic.  Model HOT 1

https://www.manualslib.com/manual/909146/Insinkerator-Hot-1.html

Emerson & Insinkerator are the same  here is a link to a owner manual 

https://insinkerator.emerson.com/documents/hot100-installation-care-use-manual-en-us-1567742.pdf