Jump to content

Georgia Mike

Members
  • Posts

    422
  • Joined

  • Last visited

  • Days Won

    3

Posts posted by Georgia Mike

  1. Rather than start a new post I thought I would ask my question on this thread. I am in the process of removing my drag link and noticed some leaking on my steering box. It looks like it’s coming from the top because it’s wet down the entire side and it looks like one of the hose fittings is discolored in the picture. I think I will have someone inside turning the wheel back and forth to see if I can find the seepage. Can anyone from the pictures determine if it’s a Sheppards or TRW box? 

    DD84A16F-B49D-4A5C-88D8-D21D9C9E6E08.jpeg

    89D18F25-F4D5-413B-B5AE-F30281D453EE.jpeg

    860EF790-F9B8-4C99-A220-309E5BA0B84B.jpeg

    133C41A1-7351-414B-BB98-C4E4D375569B.jpeg

  2. I went with the the 12 volt dual compressor Amish unit and it has been fantastic. Works just like a residential fridge and cools down in about 2 hours and stays at 0 in the freezer and 36 in fridge consistently.  My Norcold 1200 box is in great shape so it was a better choice for me because I didn’t want to deal with removing windows and seats to get new residential in. 

  3. I started looking into my starting problem. I checked all battery connections and they were all very tight. I decided to replace the ignition switch since it was fairly cheap. All went well except when trying to spin the bezel back on. It won’t tighten down all the way and seems to bind up but when i have it out of the dash it spins freely. Anyways I know there is a tool to use on these but not sure which one to order. Here is picture of the bezel I have with the three indentations and a couple of different tools I found. Anyone know which one will work? Using a screw driver and hammer is to hard you have to have 3 hands. 
    https://www.amazon.com/3918893-1968-72-TRUCK-IGNITION-SWITCH/dp/B004IWZRJ0/ref=asc_df_B004IWZRJ0/?tag=hyprod-20&linkCode=df0&hvadid=390880032701&hvpos=&hvnetw=g&hvrand=4580939133929202231&hvpone=&hvptwo=&hvqmt=&hvdev=t&hvdvcmdl=&hvlocint=&hvlocphy=1015464&hvtargid=pla-838444879129&psc=1&tag=&ref=&adgrpid=79833126213&hvpone=&hvptwo=&hvadid=390880032701&hvpos=&hvnetw=g&hvrand=4580939133929202231&hvqmt=&hvdev=t&hvdvcmdl=&hvlocint=&hvlocphy=1015464&hvtargid=pla-838444879129

    https://www.classicindustries.com/product/all-years/chevrolet/chevyiinova/parts/T10010.html?gclid=EAIaIQobChMI4am3w_mo_AIVwxmtBh0ACgtxEAQYHyABEgIJZPD_BwE&gclsrc=aw.ds
    https://www.zip-corvette.com/60-65-ignition-switch-bezel-tool.html?gclid=EAIaIQobChMIytaHmfqo_AIV4Rd9Ch1-rgH6EAQYEiABEgLFMvD_BwE

  4. If you get a windows tablet make sure it has a full size USB port that way you will have a separate charging port. A lot of the tablets have one micro usb that is also used as the charging port so you can’t change it while the vmspc is plugged in. I had a Dell venue on my old Motorhome that worked well or Microsoft surface would work. 

    • Like 1
  5. To me it really depends on how long it’s going to be below freezing. If it’s only for a few hours in the morning I would do as Tom said and just drain the water out of the lines by opening up all the faucets at the lowest drain point but I wouldn’t be concerned with the water tank or the water heater since those large volumes of water will take a long time to freeze. Now if you have an Aqua Hot I never take a chance with mine. If I even see anything near freezing I always run antifreeze through it  for sure. 

  6. Some of the dash switches light up when turned on and some don’t but they all function ok. I know I turned on the Aqua Hot preheat on one cold morning and had to turn on the Aladdin and watched the engine temperature slowly rise to make sure it was working. 
    Ricjard I am getting ready to service my Aqua hot for the first time I have the same unit you do so I will let you know how it goes

    • Like 1
  7. When I first bought my Dynasty last year I found my Thomas compressor wasn’t working. With the help of everyone on the site they educated me on how it worked. When I pulled it out it was caked with dust and dirt in the motor vent opening. I ended up finding one on eBay that had been used in a dentist office with very little use and it was cheap….my price range.  I ended up getting some breathable foam and wrapping it around the compressor to keep it clean. Mine is up near the rear axle so a lot of dirt and debris gets thrown up there.  I had a leak that I just got fixed at Josams but prior to getting it fixed it would run quite a bit now it doesn’t come on at all. 

  8. I had a very similar problem a while back. If you search for “power load balance” lots of good information in there. To do a soft reset there is a little black button on the Magnum charger next to the little green light. You have to push it in for 15-20 seconds and I think it starts rapidly flashing then release.  

  9. Richard, I called the number for Coach net. The first thing he asked me was am I in a safe place. Then I told him I needed a tow because the vehicle had been in an accident. He put me on hold and came back as if he needed to ask someone a question and then told me I would have to pay for the tow because Coachnet wouldn’t cover it because it was in an accident. That’s what im concerned about them covering towing if our Motorhomes gets into an accident. Has any of your experience’s with them involved that scenario? 

  10. My son works at Delta in Atlanta and was leaving work and got involved in an accident on i285 yesterday. He is fine but his pride and joy Nissan hardbody got destroyed. He was hit from behind by a drunk women with two small kids in the car. I got there in about 30 min and decided to try and get the truck towed myself. I called Coach.net because it covers all our vehicles. The guy tells me because it was involved in an accident it wasn’t covered for towing. I was like WHAT!! Are you kidding me. I was so passed I just hung up. Afterwards I was thinking so if I am in an accident in my Motorhome it’s not covered as well? So it’s only good if you break down? Have any of you come across this? I’m calling them tomorrow. Btw the women got arrested and charged with DUI. 

  11. Just wanted to follow up on this electrical problem I was having. I ended up ordering a new Magnum 2000 watt inverter and installed it back in August and also not long after that installed the Hughes Autoformer. Since that time I have been on 4 or 5 trips without any problems. Hopefully this lengthy discussion will help someone in the future. Thanks to all that responded.

×
×
  • Create New...