Jump to content

Ron Shantos

Members
  • Posts

    39
  • Joined

  • Last visited

Everything posted by Ron Shantos

  1. I need AC DRIER for a 2008 Beaver Contessa. Anyone have any knowledge to share if this might be the same. Beaver was built late 2007. It has the SCS (Specific Control System) Dash Heat & A/C as do most Beaver & Monaco units of that age. SCS refers you to REV Group as they do not sell retail. You probably know that story!$ I have found the replacement for the AC CONDENSER if anyone needs one. Radiator Supply House can supply most Beaver/Monaco AC Condensers. They just need the VIN #. I also am looking for any knowledge of the 2 AC CONDENSER "O-RINGS" part number or source appreciated. Any help/info appreciated.
  2. Mike, I believe these are the very same fixtures that are in my 2008 Contessa. If so, take a very small/fine straight bladed screw driver and insert between the first ring and the second. Slowly pry that inter ring and glass out. These are held in with clips. Be careful not to scratch or mar the chrome. This should work. Ron
  3. When you say door handle, are you talking about the LIGHT in the door handle? Just for information, the gooseneck map light at the passenger seat console works. I don’t recall ever seeing a 12v breaker box in bedroom. I will look for one. Thanks
  4. Bill, This is a goose neck/flexable map light located on the driver side console, not the ceiling overhead map light. The one in the ceiling works properly but rotating the headlight switch on the dash. Thanks, Ron
  5. In the process of replacing the light bulb in the "Goose Neck" Map Light (per label on the positive wire) I blew the fuse to the MAP light. I have checked every fuse in the electrical bay and all are good. I can find nothing else electrical on the dash that does not work. Any ideas appreciated. Ron
  6. What areas are you needing? I have a full set of drawings and with some help I can post all of them. Again, I am sure that they apply since Beaver used the same contractor to do the wiring. Let me know what files or areas are of interest. Ron
  7. Mario, i will try to do a post on this forum. If that does not work I will be glad to email you diagrams directly. My email is rpshantos@gmail.com. I have a full set of 2008 Beaver schematic. Let me know what specific drawings you are needing. I bet Beaver, Rambler, and Monaco are all the same for those years. Ron
  8. Mario, I have wiring diagrams for a 2008 Beaver. I bet that they are the same for a Monaco & Holiday Rambler. Let me know what in particular what you are needing. No guarantees they are the same. Ron
  9. Appreciate the information. That looks like the correct format. Will contact them. Ron 2008 Beaver Contessa
  10. Thanks for the inputs. I contacted Victory Climate Systems in Ft Worth and they DO NOT sell retail. They told me to contact Rev Group. They want like $900 which is way out of line. Will check with CG&J Radiator in Gadsden AL today. Thanks for the inputs and any other suggestions appreciated. GREAT FORUM!!!!!!!!!!!!!!!! Ron
  11. Looking for source or knowledge of replacement of the AC condenser coil for the side radiator configuration. The condenser is bad therefore looking for source of a replacement. Ron 2008 Beaver Contessa Lake Texoma, Texas
×
×
  • Create New...