Dave Shackelford

Update, After fixing the power cord end it stopped working again. Turns out it was the power cord reel internal connection went bad. Burned up. Took out the reel and made a direction connection. All good now. Dave

Thermo Nuclear destruction , Meltdown, Fried, DEAD spliced the cord to the electrical box that goes to the Transfer switch. I am no longer going to use the reel. Thanks, Dave Yep, I spliced them and no more reel. Thanks, Dave

I prefer new. thanks Rick This works. many thanks, Dave

I have a 2005 Camelot 40 pdq and my power reel broke today. Too worn out to fix. Any suggestions as to where and what brand I should buy ? It's an old Shoreline reel by TDI products. Model RV5036. Can't find another one like it. thanks, Dave

Congrats to you guys. You nailed it. It was a half broken wire inside the plug to the pedestal. Called Xantrex and the tech cleared the inverter. Called the transfer switch guys and they cleared the transfer switch & told me it was a dropped leg on the power cord. Problem was it was NOT broken all the way and that made it difficult it troubleshoot. Anyway problem solved and didn't have to spend money !!! Dave

Seems like two or three A/C outlets don't work. IE: Coffee, Microwave &TV all on passenger side. Forgot the fridge

I have a 2005 Monaco Camelot 40 PDQ and my transfer switch is acting up. If I start the generator everything switches over just fine. When I stop the generator it will NOT switch back to full shore power. Some electrical outlets don't work. Tried running the gennie for a while and stop again but no switch. Tried several times. Any ideas ? See attached pics. Thanks, Dave

I pulled the oil pressure gauge and applied 12 V to the S terminal and grounded to other terminal and no change. Doesn't matter where I apply 12V to. Still change, pegged all the way to the right...

If my Alidian is reading the correct oil pressure isn't it getting that info from the sensor ? IE: sensor ok but gauge bad ? Dave

I have a 2005 Monaco Camelot 40 PDQ and ISL400. My oil gauge is pegged all the way to the right. I checked ground and voltage (reading 11.89 VDC). Two questions: 1) Where can i buy a new oil pressure gauge. 2) Where is the oil pressure sensor located on the engine ? BTW, My Alidian shows good oil pressure reading. Thanks, Dave

Talin makes a great product. Installers there are great. I have been trying to contact Chris as well but no luck. We all need to send him messages until he responds so we can call him. Stay away from Britany 😞 Dave

Shade goes up but want go down sometimes. I think I got it fixed. Loose connection.

Many thanks

Got it. many thanks, Dave

Where is the control circuit board located for the front windshield shades ? thanks, Dave

I have a 2005 Monaco Camelot 40 pdq. Where can I find a new step motor ? thanks, Dave

Take it to an alternator repair shop and have it rebuilt. I did mine and it was fast & cheap. Dave

Many thanks for all the info. Dave

Many thanks, Dave

I have a 2005 ISL400 Camelot40pdq. My boost gauge reads a range is 5 to 15 lbs while driving on level roads. It does go up a little when I get into the mountains. My question is this a normal reading for my rig ? thanks, Dave

Make, model, year, SN

MODERATOR EDIT The "Build Sheet" does not actually exist, but there is a Major Component Data Card....commonly called the BUILD SHEET. There are TWO "SHEETS" or Information Documents that were usually provided when a new Monaco was purchased. The Recreational Vehicle Data Card list all the major Components, Manufacturer, Model and Serial Number....referred to a BUILD SHEET. The "Window Sticker" or what Monaco labeled as the M.S.R.P sheet listed the base items such as MY, VIN, SN, Interior & Exterior color, Standard Equipment ($XXX,XXX.XX) and the Optional Equipment...or the MSRP for the MH. END of EDIT Where can I find the build sheet for my 2005 Monaco Camelot 40 PDQ ? thanks, dave

Hi Donald, Do you have a p/n for the plastic gear & where can I buy one ? thanks, Dave

Thanks, Baught 2 metal gears on ebay. many thanks, dave

Hi Guys, I have a 2005 Monaco Camelot 40 PDQ and the bedroom (Passenger Side) slide plastic motor gear is worn out. Missing teeth. Where can I find a new one ? (Plactic Gear) See Pics Thanks, Dave