Glenn Strom

I haven’t messed with the Temp settings, we tested it & the water temp range is easily adjusted. Wife is very happy! 😊👍🏻

No, the wiring still needs securing so the job is not completely done. I got them from Amazon but they no longer sell that particular model. Most LED Bar Lights should work just fine.

Yes! See attached picture.

I decided to upgrade the weak lighting from an AZ Expert James Video. He got these night LED 12 VDC Light Bars from Amazon. Boy what a difference, higtly recommend it, very helpful since so much stuff tends to get lost under there. 🙂

True it was fairly easy due to easy access from the bedroom wall. I'm not sure if what I replaced was original but I didn't like the way it was installed. I almost went with the Shower Only Valve but I realized that rotating it upside down would mess up Cold and Hot locations so I went with the Bathtub and shower & plugged in the Top Shower as the original showed as the setup uses the bottom bathtub connection.

The old shower valve was very very finicky. You could be scolding, hot and freezing, cold by barely moving it. I decided to upgrade it with a nice Delta, residential that you can dial in much easier and more accurately. I modified the connections using all shark bite fittings, turn on much cleaner install. I have posted before and after pictures of the install and valve assembly.