Jump to content

Geffery

Members
  • Posts

    21
  • Joined

  • Last visited

Everything posted by Geffery

  1. Hello on my 2005 Monaco Diplomat i have gauges for speedometer and fuel gauge not moving and also the low air pressure alarm does not go off until up to pressure.
  2. Hello thank i got a new assy from Amazon that was LED thanks anyway!
  3. Thank you for identifying i found it on Amazon!!
  4. Hello looking for help identifying air solenoid (see attached pictures) that it is located under driver compartment with the fuses. It has two white wires and two air lines connected. On 2005 Diplomat
  5. Thank you very much Tom i will read up on the manual. The fluid is clear so it may be the hydraulic fluid ATF is usually red. I already changed all the other filters and fluid including generator, I did use the TransSynd in trans. Really appreciate your help!!
  6. I traced the two lines from canister looks like they go to unit bolted on to engine see puctureIMG_5255.dngIMG_5255.dngIMG_5255.dng IMG_5255.dng
  7. Hello do you have any contact info on that vendor?
  8. Can you please tell me what this canister is for and what type fluid goes in it?
  9. Hello i am looking where to buy replacement light cover for 2005 Monaco Diplomat. The light is the one outside above entry door
  10. Thank you very much this is a great help!!!
  11. Hello i am looking for help finding the transmission fluid temp sensor that is screwed in the beginning of the fluid line coming out of the transmission. Its an Allison 3000MH transmission fluid temperature sensor for dash gauge.
  12. Hello looks like trans themp sensor is not working temp did not move on dash gauge. (any suggestion) Also i could not shift to help circulate fluid as check trans light was still on. Do we happen to have picture or location of trans temp sensor? This is erro code i get if i press both arrow buttons twice see video 71701742328__343A081E-4842-4297-8D5E-4AFF9ED0CCC6.MOV
  13. Thank you for your help i will try it today!!
  14. When removing power do you mean disconnect battery for a few minutes?
  15. Hello I need some help resolving an error 0, L, -, 7, 0 Sump fluid temperature too low. I drained the fluid, dropped fluid pan and replaced both filters, pan gaskets, internal sump filter, reinstalled and added correct amount of fluid. IMG_5889.mov
  16. Thank you for your response i will try that Thanks i will try bypassing salesman solenoid
  17. I have an electrical problem all was ok when i parked and plugged into 50 Amp power cord for a few weeks. Sides would go out could adjust thermostat heat, refrigerator was working, ceiling lights and wall lights worked, could start generator, dash radio would turn on, step lights would work. Now none of them work. Checked 12v switch at door step no change.
×
×
  • Create New...