tommcd

Thanks for the info,, Have removed the salesman switch and connected the cables with a bolt and nut, then taped it up real good. Have gotten some good info on here and appreciate it all. Now ,, trying to figure out a trailer brake controller. I've seen a lot ways to wire in relays and that way seems awfully complicated. Why cant a pressure activated switch be tee'd into the air brakes and use that to make the controller work?

thanks

thanks,,found a jumper cable someone had made up in the compartment. wondered what it was for..it wasnt connected to anything. should i just build a permanent cable to connect both sides of this solenoid?

I HAVE LOST THE 12V SWITCHED HOSED POWER, I have power on the unswitched side . nothing inside will work but have found that if I jump from one side of a solenoid looking item in the left front fuse panel , everything is powered up. any help?

Same here..Thanks

Best I can tell, mine doesn't have cargo door switches, but will try it with switch off tomorrow. I didnt get an owners manual with it but have found one online and it says ign switck off. Thanks for the info. Will get back to you tomorrow.

Just purchased this unit. Has 4 slides and can't get them to work. Unit level, park brake set, seats forward, switch on not running, gen running , house batteries check good. What am I missing? The leveling system had to be reset before I got them to work but that was simply holding all 4 buttons for a couple seconds. I have checked all fuses and they seem to be good. The 20 amp breaker in the board with the relays isnt any good so I replaced it with a 20 amp fuse and still nothing. Any help ?