Steven 53

Just got home thinking about problem. When the mh not running headlights work. Never had a problem with cruse/wipers while driving just headlights. park turn signals work fine. Probably need to follow the splicing on wiring coming from smart wheel. Hard to figure it happens when running

Well went to compound it get mh. Zipped tied relays to secure so no movement turned on headlights flip h/l several times started mh let it air to ride hight pulled headlight switch no blue light high beam shut down mh went to fuse box and fuse was blown. Relays fuses were fine probably smart wheel is the problem. Might do work around for switch to relays to try that just Might be my fix for now.

Okay just wired in my 2 bosh relays and inline 20 amp fuses one for each relays still have some tiding up to do. That's for another day mid 90 now been in sun most of the day except when in generator bay. Headlights work both hi/low took few days for my stuff to come in. Hopefully tomorrow take for a test run with lights on and see if any fuses blow.

Will be going back to mh tomorrow. Pulled cover around steering colum before I left today to see wiring harness and saw some one has done some splicing and ran different wires into the dash and some were else these wires have numbers on the wires that's original. I figure they go to smart wheel. My lights are single bulb tested red high beam blue low beam. Put new fuse in went back and forth h/l multiple times lights still work same using smart buttons. Checked voltage at headlights 12.8 volts engine not running. Possible problem when driving and turning steering wheel. Back at it tomorrow be nice to have wiring diagram to work with from switch to wheel to lights.

Both good ideas. Where in line to put relay in the dash from light switch. Or some place else?

Yes I have the original factory wiring diagram booklet but it has nothing 0n headlight wiring just my luck. Maybe a different model year will have it. I will look through the downloads.

2004 windsor w/smart wheel keep replacing 25 amp fuse in front bay. Setting in storage lot doing work on mh. Replaced fuse headlights work h/l beams pulled dash to look at switch ( po Replaced switch) pushed light icon on wheel hb on dash blinks off and on also wiper icon same note key is off. When I bought mh took a trip no headlights pulled off road to check Replaced fuse blue again drove with fog lights to a Walmart parked wait for daylight. The mh had some kind of led lights installed in old headlights. Fast forward bought new headlights assembly thought too much draw for leds lights. Now chasing the problem. Help much appreciated.