rpasetto

If it's the "Haldex KN20031" it's available here:  https://www.finditparts.com/products/368639/haldex-kn20031

Walter, Thanks for the  TOC.

Frank, I  emailed you a link to my PDF copy of the 03 Dynasty Wiring Book.    Let me know if you got it OK.  If not I'll find another way.

.. Rick P

On 12/15/2019 at 9:32 PM, Frank McElroy said:

Walter, I'm not seeing a set of 2003 dynasty wiring diagrams in the files I uploaded.  If you have a set, please go ahead and upload them or post them here and I'll do it for you.  I can also convert your index docx document to pdf and combine the two into one document.

On 12/15/2019 at 4:26 PM, wamcneil said:

Hi All,

I believe a PDF of the 2003 Dynasty Wiring Diagrams has been available in the community files for a long time. That has no table of contents (neither does my original hardcopy), so I have to page all the way through it every time I look for something...

So here's a TOC I paid my kid $20 to transcribe. 

This hasn't been thoroughly checked for errors... 

Cheers,

Walter

2003 Dynasty Wiring TOC.docx 26.14 kB · 27 downloads

Thanks, guys.  I'll contact them.

Hi,  Has anyone here replaced the original dual wheel braided valve extenders?

I've talked to some tire places and they can provide/install a  valve with a rigid extender on the inside dual to go thru the hand hole in the outer wheel... they also can put a short valve turned out for the outer dual.  However I've seen some dualies which have a "stabilizer"  for the rigid stem which comes thru the outer wheel.  Some I've seen look like rubber in a circle. 

My '03 Dynasty has a "D" shape wheel hole; I've seen many Monacos which have these type.   Tire guys say they can replace valves and install the rigid extenders but none  have the "stabilizer" for our type wheel.   I looked in the parts list and find the link to Borg Tire Supply; parts list shows a rubber plug which looks like it fits those "D" holes... but link  doesn't work.  The Wheelmasters site shows extenders  but not those rubber plugs.  Other supplier suggestions?

14 hours ago, Hotrod said:

Dave,

One of our members has yet again accused bill g (me, hotrod) of being groups.io . That is totally false and FB monacoers has nothing to do with monacoers.groups.io or visualsc or bill Johnson . 
 

bill g aka hotrod

06 Dynasty

Bill,  Someone might have confused you with the guy who set up the  "groups.io Bill's Monacoers".  This is getting crazy... was that accusation made on the FB page?   I'll go there later to check.

I have an additional thought; I should have posted a note that the groups.io  "Bill's Monacoers" forum  is not the real deal  .... for all who are leaving ....  before you unsubscribe, post a note.

David,

It looks like I was fooled "big time" by this guy.  I had heard that the "visualsc"  group was bogus.  When I saw the groups.io email which  said that the  "group on groups.io is a much better fit" than the one on visualsc   I thought I was hearing from the original yahoo monacoers.   Not being a frequent user of  the  monacoers form, or any forum for that matter, the groups.io statement had been enough to convince me.   

I have just now unsubscribed to monacoers-groups.io,  however, everyone should know that if this guy got my email.  It's likely he got the emails of all the original monacoers.    While I don't have a problem with forums in general, it is disconcerting to see that a forum would fake it's identity.  What could possibly be the motivation behind doing something like that.

I am not an attorney, however if someone has stolen your parts list or other intellectual property, legal action may be possible.   If anything you have copyrighted is stolen,  the case for legal action may be stronger.

The best to you guys who have contributed so much information.  I have appreciated the documents and advice over the years. 

    ... Rick P, 03 Dynasty

Some time ago I discovered a website at visualsc.com entitled "monacoers".    I inquired about it and some time later received a reply in October:

"You recently requested access to our test forum at http://www.visualsc.com/monacoers/  This is a Test/Demonstration forum that is not currently open to users and may not be in the future." ....

"You have been invited by Group Admin to join the Groups.io group monacoers@groups.io.   The following message was included by Group Admin:  You had previously applied to http://www.visualsc.com/monacoers which was under development.  After review, we have realized that a group on groups.io is a much better fit to our objectives." ....

I saw a message sent to me yesterday,  Dec. 10th posted around 9AM,: 

"Welcome to the monacoers@groups.io group at Groups.io. "....

Then around 2PM yesterday, another message:

"Hi rpasetto,  An administrator has created a new account for you at Bill D’s Monacoers. Your account details are: "....

My first thought was that these were all the same group.. and that the original group had either changed URL or added an alternate... then a long-time friend who I knew was in monacoers explained that the visualsc and groups.io groups were not the original monacoers.  

I haven't been only occasionally active in the yahoo-monacoers forum; this seemingly conflicting information is puzzling.   I'm not sure what is going on but I think that I now have the right group here.  However if I was confused it's possible that others have been  confused as well.  Just want those running this group to be aware what may have happened to others.