ktloah

Thanks Tom

So my screen for the entry door got damaged. The frame is not damaged but the plastic inserts that keep the corners together have broken. Anybody have any suggestions as to where I can get this fixed. I have already tried a local screen door and glass repair, but no luck. Thanks

My 04 Dynasty lost its headlights and it was the J12 connector on the smart wheel controller. It's located in the panel below the drivers side. I replaced the connector with a 30 Amp relay bypassing the connector. 

Fill each filter with diesel and your good to go

There is no adjustment screw on the filter. The bubbles are air. Like Ivan said, change out those o rings on the filter

Keyless entry, look under passenger cup holder, there should be a momentary button. Essex Electric can tell you how to reset your system. Believe they are located in CA.

Exactly what jdw said. You can pickone up anywhere that sells truck parts. No need for #'s...just tell them you need a maxi brake can...

In my experience,  post turbo is where my sensor was located and anything above 1200F was considered 🔥 

Thanks

I have an ISL 400 in an 04 Dynasty. Is the valve in a relatively easy place to see which valve I have?

You can remove the 6 bolts, clean the mating surfaces and apply a bead of silicone and reinstall...

There is an awesome ALLISON shop in CRANSTON RI...right off of 95.  NE Power Products.  Great people too

I for one never let my tank get below 1/2.... sounds to me like you have dirty filters...like others have said, change them first. 

Are you sure the bag is leaking? Could be the solenoids for travel mode on your leveling system

That's awesome Rick, happy trails

Tim is correct...you need to change the board in the A/C units...

Check all the connections  and clean any corrosion...good luck

If your fuses are all good, I would next look at the smart wheel box. My 04 Dynasty lost the headlights and turned out to be a burnt wire where it.plugs into smart wheel box..good luck

What kind of repairs did you have done?

Thanks

Hey Frank, have any issues when pressure washing the engine with electronics or sensors on engine?

I think what they were asking was what one used to clean their engines....

Do you lean on one side when in travel mode? My 04 Dynasty did, called HWH, talked to a tech who walked me thru diagnostics and turn out to be a bad solenoid on front manifold(on mine). Bought the parts, replaced my self. Just be sure to block up your frame...

I am definitely interested in this thread!!

I'll try it, thx