Bill Morgan

I imagine if you had an enclosed trailer you could put enough solar on the roof to charge the Tesla...

Dielectric grease is non-conductive and shouldn't be used on contacts or connections. It is meant to be used on things like rubber boots or, in the olden days, the rubbing block for the points in ignition distributors. What you should use on contacts is Deoxit D5 contact cleaner followed by Deoxit Shield S5. Product descriptions: The DeoxIT contact cleaner is a fast-acting deoxidizing solution. This D5S6 contact cleaner spray was designed for use as a general treatment for connectors, contacts, and other metal surfaces. More than just any contact cleaner, DeoxIT chemically improves electrical connections to ensure clean and clear sounds. The D5S6 DeoxIT is an essential accessory every musician must have! CAIG S5S-6 DeoxIT Shield S-Series S5 Spray. Contact lubricant and protectant for metal surfaces. Oxidation and corrosion deterent. Improves conductivity maintains optimum signal quality. DeoxIT? Shield also reduces wear and abrasion arcing RFI and intermittent connections and improves connector performance/reliability. Ideal for severe environments. On oxidized surfaces pre-treat with DeoxIT? D-Series contact cleaner. Temperature range: -34 C to +210 C.

Or head to a wrecking yard and grab one for $5.

Looks exactly like the control panel in my 2004 F150.

You were lied to.