Jump to content

Capt Mike

Members
  • Posts

    82
  • Joined

  • Last visited

Everything posted by Capt Mike

  1. Hi Rick, I have not yet been able to confirm if I have 110V into the GFCI outlet. We had a commitment out of town and will confirm on Tuesday or Wednesday.
  2. We were in the final moments of the purchase of this MH when we discovered the inverter was not working. We started to walk away because LaMesa RV did not want to replace the unit and they finally caved and replaced with the unit in the pic. Most likely the least expensive in stock. It has functioned fine since July of 17. I’ll be able to diagnose further once we get home early next week. Once again, thank you for sharing your knowledge on my issue here. I will report back on my findings!
  3. Thank you for that info…I’ll dig into that file in a few days time as we are on the road in the RV. And Thanks to all who replied…such a wealth of knowledge in this group of people!
  4. Thanks for all the input, I believe the inverter is bad. Only one pin breaker where there should be 2-3?
  5. Thank you Tom, will check all of that. The Iota switching has been replaced, I’ll open it up and check terminals.
  6. Oops, forgot to mention that I checked the inverter breaker, only one marked 30A. The inverter is a newer Magnum 2000, are there other breakers on this inverter?
  7. GFCI in the bathroom not resetting, hastily installed new receptacle, did not fix problem. No 110V outlets energized forward of bedroom in the rear. Checked breakers in aft closet and all good. Anyone know if there are more breakers anywhere? Thanks in advance!
  8. And you could recoup some $$ by selling your old tires on Craigslist.
  9. Just took a pic of the items I received from SEA, the small white plastic “sliders” fit on the bottom of the doors and help the door “glide” a bit easier.
  10. I had a similar incident with my two sliding mirrored doors, 2008 Knight 38PDQ. Found a manufacturer sticker on the back of the door, googled that company and contacted them. They sent me parts no charge! I’ll look for the info when I get into the coach this afternoon. SEA something or other.
  11. I installed LED fog lights, fairly easy to install. Many out there, Amazon EBay etc.
  12. Thank you Bob H. I’ll try that spray first.
  13. I’m going to get some new Allen wrenches and get the rheostat replaced. Thanks for all the help folks!!
  14. From what I can see on the set screw, it’s either an Allen screw or a torx? I can’t get anything in there to loosen it.
  15. Looking for this particular combo switch for a Fantastic vent on a 2008 38 PDQ. The rheostat for the fan speed is working only on full ahead. Tried to remove the knob without any luck. Any ideas would be much appreciated.
  16. Thanks Scott, I have ordered from Amazon, got 4 for the price of one from Veurinks.
  17. Thanks all! I guess I need to search higher and lower next time. Thanks again
  18. Looking for this “switch” for the wet bay lights 12V. Looked hi and lo to no avail.
  19. We also have the freestanding ice maker, works great!
  20. I don’t want to sound like a jerk, but you really should read the instructions and follow them to take advantage of the savings. Download the app, there are two of them, I like the original one and I can see what stations along my route offer the best price and I see my transaction details as soon as I’m climbing back into the RV. Best of luck to you!
  21. I would look at Roadmaster website and they list all the vehicles that will accept a base plate. Maybe Blue ox site has something similar?
  22. Thank you for that gracious offer, I will take you up on it! pleas advise on how we can contact each other? Many thanks
  23. Great idea, going to try that now! Thanks
×
×
  • Create New...