gdroberson
-
Posts
112 -
Joined
-
Last visited
Content Type
Forums
Downloads
Articles
Gallery
Blogs
Events
Store
Posts posted by gdroberson
-
-
thanks and I will keep looking
-
I know this has probably been ask before but does anyone know what code reader will work on this 5.9 cummins engine the only place I can find to plug is back at the rear right side of the radiator is a 7 pen connector for the engine cant find nothing under the dash to hook up a scanner nay help would be appreciated thanks
-
make sure valves are open if pump is pressured up it wont run
-
you had the chance to get rid of hem
- 3
-
take it to a motor rewind shop sometime they can rewind and make it more powerful good luck
-
I replaced my pump took about 4 hr on a5.9 the pump is behind everything
- 1
-
I changed all my bulbs in the last two MH just get the bulb number and cross it on amazon
-
change all the bulbs to led
-
thanks I will give them a call
-
OK just talked to steering department at Weller they have no replacement for the m80 that will work and a rebuild is a crap shoot
-
called Weller truck yesterday left 2 messages still no call back will post when I can get the info
-
Thanks put in a call have to wait on a call back
-
OK does anyone have brents last name at Weller Truck parts thanks
-
going to call tomorrow and thanks
-
thanks will give hem a call monday
-
I need to find out if there is a TRW box that will replace the sheppard r80
-
has any one had a sheppard steering box replaced withe a TRW if so do you know what the part no. was thanks
-
-
hinges or slides
-
home depot
-
-
when you put in the new one use ss screws
-
I took a piece of 1 x 2 and a 3/8 dowel and drilled two holes in it and inserted the dowel sticking out about a 1/2 inch so that the dowels fit in the two cot outs that is in the flange used the 1x2 as a spanner wrench to unscrew and screw the new one back own
and by the way you couldn't
tell it was screwed on just by looking
I took a dremel tool with a grinding disk on it and cut a slot so I could use a big screwdriver to get them out
-
most of the time they are screwed on
2001 ambassador code reader
in General Motorhome Discussion
Posted
Found it took the steering cover off and was tie wrap to the top of steering wheel bracket thanks again for your help