gdroberson

about 6 months ago 2 lane not to bad but I was in a car

you can probably use some hotmelt glue and glue something to it and pop it back out and then use some denatured alcohol to take the glue off

thanks Gary

thanks

yes 4x4 and thanks for the reply

ok towed trailers for ever not tried flat towing I have a 2020 ford ranger and thinking of setting it up to tow but dont know what is a good setup thinking of picking up a used blue ox bx 4325 tow bar can get at a good price but dont know if it is a good tow bar or if I should look for something else that would be better dont have a clue of what I need so any suggestions' would appreciated thanks Gary

the hose goes from that fitting to the tank when it gets to the tank there should be a shout off valve

yes had the same thing happen to me the hose dry rots and when they put the pressure on it to fill it leaks through a thousand pen holesI went to the hose man and had a new one made ther should be a valve on the tank that you can shout it off and remove the old hose and take it with you

can you unhook the linkage from the latch so you can get more movement out of it

yes my 01 30'ambassador is the same way

have someone hit the slide switch while you keep the meter on the out put side of the solenoid and see if the volts stay could be bad contacts in the solenoid

I just took some needle nose pliers and tore it out there is a 1 in hole through the fiberglass the lights are put on last

I removed that black r5ubber part and there was longer wire behind it

he used th wrong glue you have to use the glue that is made for solid surface

do you have the red and yellow lens