Jump to content

JeffM31

Members
 View Profile  See their activity

  • Posts

    84

  • Joined

  • Last visited

 Content Type 

Everything posted by JeffM31

  1. JeffM31
    Goes inside the wall with all the cable wires
  2. JeffM31
    Okay guys what’s this wire?
  3. JeffM31
    Found it on Quickserve, from this 10 is normal??? Maybe I am for sure chasing nothing Maximum Intake Restriction Clean Air Filter Element 254 mm H2O [10 in H2O]Dirty Air Filter Element 635 mm H2O [25 in H2O]
  4. JeffM31
    I just have the Monaco book, is this from there? I think 25 is standard though
  5. JeffM31
    Yes I was thinking that too, I have to wait, I have her tore apart at the moment changing coolant, belt, hoses, pulley, etc. Question of the hour, which minder is supposed to be on there? Mine max is 25 I see donaldson has a 30. Am I chasing a lost cause due to the wrong minder on there?
  6. JeffM31
    Im thinking of cutting a piece out of it or even drill some holes in it. Above the water line of course
  7. JeffM31
    I agree with you 100% just seems like the air path isn’t smooth
  8. JeffM31
    Does this seem too high. Not a smooth path for air.
  9. JeffM31
    Hahaha I sucked mine too. 🤣🤣 My indicator is remote to see it easy. Open the rear doors and bam it smacks you.
  10. JeffM31
    I’ll get a pic of the intake up top behind the grill. I think it may be too high and not able to suck enough air. Just speculation at this point
  11. JeffM31
    Here is my filter
  12. JeffM31
    I’ll snap a few pics. The filter is huge. Thank you
  13. JeffM31
    This is what mine seems to do So just an update, I tore it all apart and there is absolutely nothing in it or anything that could collapse. I have 2 quite hard elbows that seem to be plastic from the filter to the turbo. Just weird IMO. I stuffed some rags in the there and blew out the 1/4" line to the minder but it was clear. I guess I just have to reset it after each trip. Maybe just a poor design or placement of the minder tube on the intake?
  14. JeffM31
    When I bought it, it was almost to red. I did all filters and usual maintenance then have only taken it out twice so far. It’s just boggling my mind of why it’s doing this. The power and everything seems to be there too.
  15. JeffM31
    True. I may look deeper I can’t remember 28 maybe
  16. JeffM31
    Hello everyone, Quick question, last trip the filter minder would pull to almost the red line. Yes, it has a brand new filter. I figured the minder was old so I changed it. Next trip same thing. Is the black hose coming from the top that restrictive? Also the green pvc IMO extends too far up behind the intake grill. I have checked everything for any restriction anywhere. Thoughts please.
  17. JeffM31
    Good morning, Does anyone know the number for the rubber grommets that hold in the taillight on an 06 Diplomat? I found some nylon ones I believe that are correct. The lights are from Dodge from what I have found??
  18. JeffM31
    At least it was cheap. I ordered the icon one.
  19. JeffM31
    Decided to finally change the cracked neo-angle skylight on my 2006 Diplomat. I took pics along the way. 3 hours start to finish. Tomorrow I will add eterna-bond tape to it for the final. Really not that bad to do. I did a little extra retaping inside the opening, painting that black, and the inner piece black. Great amount of light being smoked. Hope this helps someone.
  20. JeffM31
    I think I answered my own question. Looks like 2x3 and 3x3 were always 15 tooth 2x2 said 2013 and below
  21. JeffM31
    Good evening, 2006 Diplomat 40' flush floor slide. Im looking to order the gear packs for the slide. The question is do I need 18 tooth or 15 tooth? I took one out and it was a 15 tooth. When you search online it says lippert components made before 2013 were 18 tooth. Did mine get changed somewhere along the way? Thank you as usual
  22. JeffM31
    Yes please, Jim. I believe I read your post elsewhere about one of turbo el's collapsing.
  23. JeffM31
    Well just an update. After changing the 3 PPV's and fixing the tees leaking, all is well. I charged the air system to 90psi with my compressor and it has been sitting for 2 weeks now. I am now down to 50psi and she is not leaning like she was doing. I call it a win.
  24. JeffM31
    Found Haldex 65psi ones for 14.99 I think Ill give it a go New Haldex 90555399 Pressure Protection Valve 1/4" NPT , Opens @ 70 closes 65 PSI
  25. JeffM31
    No six pack. There is a Ppv valve on the rear for each set of bags. It leans left once the air leaks out of the tanks. Right side stays up. It just started doing it a few weeks ago. I think I’m just going to change them and see what happens.
×
×
  • Create New...