Ivylog

Had the outer pain of a side window shatter...tempered glass. These are the thin dual pain with a small air space. Trying to find the manufacturer. Thanks

Yes, the pictures of the broken #6 valves has chunks of the outside perimeter ( sealing surface) missing. I’ve been told a 1.25” metal freeze plug fits nicely into the EGR tube where it bolts to the engine intake tube.

I learned of the ISX #6 intake valve issue a couple months after buying a 08 Navigator with a 06 ISX 525 engine 2 years ago. A higher % of MHs are having this problem than trucks and the higher HP (600-650) are dropping the valve more often. They are not snapping the valve off, the perimeter of the valve breaks off usually getting the piston and the turbo. I know of two 525 HP, 06 or older, that have dropped #6. Hopefully the better valves and seats will stop the acid created by the EGR gasses from weakening the intake valves...$20K if you do it preimptpley and $30+K after it breaks. the EGR

The original GPS in my 08 Navigator works well and anytime we get near a big city the DW pulls up Waze on her phone and we use it to navigate as it has the latest roads and traffic conditions. I added Silverleaf as a overlay on the backup camera which is on the Kenwood display. Costed more than the one that needs its own display/computer/IPad.

With the true center engaged your slop is all in the Sheppard as it’s keeping the tie rod from moving. I had that muck slop in the new to me 08 Navigator and after 3 hours I crawled under and adjusted it to less than 1/2”. Previous owner installed a Safe-T-Plus which after 4K miles I removed as I found it made driving tiring compared to the 88K miles on the same chassis. I made an adjustable mount so I can adjust it on the fly to compensate for cross winds. I would start with a TRW keeping the true center.

If you have a rig with the raised side rails, mounting the panels on it makes for easy tilting. I made my own mounts out of aluminum U channel and wooden supports. 7 tilt and 2 fixed for 990W. There was some concerns (not by me) that the panels would raise up at speed. I put small pieces of paper under the ends of the supports and they were still under after a high speed test run.

History: Previous owner put a Safe T + on my Navigator but after 4000 miles I disconnected it. Under perfect conditions (level road and no wind) it worked fine but any crosswinds it made driving tiring as you had to fight it. I decided I would not use it unless I could change/adjust the center point on the fly. Too cheap to buy a $600 air activated adjustable mount so I made my own. Bought a 4", 1350lb 12V linear actuator ($54 EBay) and it might be that strong in compression but not in tension. Added a 12” adjustable arm to the mounting plat that bolts to the axle with a 3 to 1 leverage advantage...41-230 should have 230 lbs of force so only 76 lbs of force on the actuator. Silicon sealed all the openings on the actuator since it’s going to get wet... first picture. Mounting a $6 DTDP switch on the steering column that will let be move the center point L-R as necessary. Total cost less than $70. Time will tell how well the actuator will hold up. l Update, after 6,000 miles I make more fine adjustments...several in an hour as conditions or direction change. If I have to keep making slight steering inputs in the same direction over several miles I’ll bump the switch in that direction which is normally enough to equalize things.Overall I’m glad I spent the time (not a lot of money) to make it adjustable as I would have removed it otherwise. I’ve learned to not oversteer my MH... mainly giving steering inputs slightly longer to take affect, which in my opinion, is all a Safe-T-Plus does by tightening the nut behind the wheel.

The adjusting screw has a 3/4” jam nut, in plain sight on the side of the box.

The 08 Navigator we bought 2 years ago had a Safe T+ on it. After 4K miles I unhooked one end as it made driving noticeably tiring compared to the 85K miles on the same RR10S chassis (04 Dynasty). Under perfect conditions (no cross wind) it probably helped but the extra force when having to hold the steering wheel off center was was a pain in the shoulders... I still do 750+ mile days. Decided to make an adjustable mount for it once I found a $54 linear activator. DIY here: https://www.irv2.com/forums/f258/making-a-safe-t-plus-adjustable-451209.html

Original owner, 90K miles, 1000 hours generator. $73K with 2 new front tires and 5 year old rear tires or $75K with 8 new tires. NorCold replaced with 21cuft Whirlpool on a separate 400AH AGM-1000W PSW inverter-100A charger. Aladdin works except for tank monitors. Upgraded large LED TVs. Side mirror cameras with separate monitor. 3M film removed-new paint. 2 basement sliding trays, AquaHot, 800AH AGM house batteries. Cherry interior with 2 sofas...have custom cherry desk and 4 filing drawers in place of driver’s side sofa. Engine and generator recently serviced. Stored inside in N GA. 706-781-7189 Will include a Hydra Lift for $2K or sell outright for $3K.