Here’s what I’ve found. Brake light works when applied, gen slide works great, ground on number 18 wire is good on solenoid, I tested #2 terminal on switch when slide goes out there is power on it, I then put power to # 5 on switch and slide works, then I checked both safety switches on the two doors that have them they both tested fine, I then made two jumper wires and connected the wires on the switch’s and it still wouldn’t work. I’m now in the process of checking the relay in the rear compartment. The fuse breaker is good and I have two 87a relays one says bed slide the other says slide out. I have power to both put the one that says slide out has no power to the #85 terminal and it has blue with white stripe wire on it the same wire that the safety switches have on them, I then put a jumper wire on the blue and white striped wire and the slide works. I then hooked both safety switches back up like normal and re hooked the jumper wire back up on the blue and white wire and the slide works.
My suspicion is that the relay is bad on the slide out, the bedroom slide still works, if anyone has a thought on this I would greatly appreciate all the help I’ve gotten and continue to get.
I hope I have explained this good enough to help.
Thanks Steve.