Gweedo

https://www.amazon.com/Rust-Oleum-311196-Wipe-New-RainBrella/dp/B01NCM4NP2/ref=asc_df_B01NCM4NP2/?tag=hyprod-20&linkCode=df0&hvadid=693372637572&hvpos=&hvnetw=g&hvrand=9590824305660196375&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=2840&hvtargid=pla-568712396829&psc=1&mcid=6083c2d5c2a53d52bd781b11b773dcf5&gad_source=1&gclid=EAIaIQobChMIxJPpoMGYhgMVsjbUAR075gB4EAQYASABEgIYPvD_BwE

The entire system was replaced 5 years ago.  I add about every two years.  But I don’t like using the can crap.  

I’ll have it evacuated n leak checked. But it’s blowing cold now that I was able to put a lb in.  Thnx for all the responses 

Non smoker, no aminals, located in Prescott Valley AZ.  photos coming

YOU WON'T find one in better running/mechanical condition with all the extra preventative mechanical work performed, all maint records to show work. only 67k miles on a 400 HP Cummins, 3000 allison 6-spd trans, always stored in door. Always complimented on its condition.

Here are some of the important items: Brand new tires and wheels balancers this year, complete turbo system replaced 3 years ago, new shocks two years ago, transmission fluid upgraded to 75k mile intervals, coolant upgraded to 100k mile intervals, chassis AC compressor and condenser replace 5-years ago, newly replaced 4 coach batteries, Aladin system montiors engine and trans in real time. All new TPS. Air force one braking system for towed vehicle.

One year old Samsung residential fridge, all four slide out toppers replaced 4 years ago, solid cherry wood, rear leveler replaced, brand new Turbo Sanicon waste disposal, no messy slinky to mess with, one button job, Dometic fridge/freezer below, central vacuum system, front and rear roof AC's, brand new stereo with BT apple car play and it plays DVD's, new speakers with surround sound. Real leather couches, one queen blow up and one twin, the rear bed is a king size sleep number, all led lighting. Sun shade rolls up with awning or can be removed, the list goes on, This rig needs Nothing but your clothes and food.

$85K or reasonable offer,

Perhaps the Freon is too low now. It’s not taking any in.   

Awesome, thnx

Good evening, I need to add a little freon to the dash AC and  the book does't tell what type.  Anyone know, I'm thinking R134?  2007 HR 400ISL

Thnx

I could do without the top but it was pretty nice being able to sit up under there 

I just built ramps two days ago to work on ride levelers.   I used 2x10. 5 levels. 5’ 4’ 3’ 2’ 1’.  Worked awesome but I don’t know about the tag sorry I don’t have one.   $90 to make 4 Ramps n they cut the sizes. 

Thnx brudah! 

Thank you, my parts are supposed to arrive today. 🤞

Hello all, I will be replacing one of my rear ride height leveling valves.  07 HR 88R8.  Any tricks or do’s or don’t?

Thanks

2 hours ago, Gweedo said:

thank you

I called and that is the same number.  Need to reduce the 3/8 to 1/4, do you recall doing that?

I’m thinking of ordering 1 or 2 extra in case, not sure how long they last.  

21 minutes ago, MyronTruex said:

https://daytonairsuspension.com/products/leveling-or-height-control-valve-h01500un

 

Check this site out. Your's looks like mine. My owners manual shows how to adjust them, except the ones shown in the manual are a different design. So I had to just experiment a bit. 

thank you

No problem thnx. I’ll call source engineering tomorrow.  

I don’t think there is an exhaust port they are all hooked up. 

I will go out and look right now.  it appeared to be three lines but perhaps one is the exhaust.   I shall return shortly

Been a few days n started leaning to r f again. Sprayed everything no leak. Contacted Jim at source engineering, he said it was probably the r rear ride height adjuster valve.  I sprayed it n one of the three  fittings was leaking pretty good, he was right, they were closed when I called back to see if he had one; I left him a message.

Anyone know where to get these?  I looked up some older threads but the links wouldn’t pop open.  
Anyone know if you replace the entire valve or is the fitting where the hose goes into replaceable?  I’d rather replace the entire valve. 
 

Gracias Hombre’s. 

There is only 3 steps , 1. clean the lenses

2. sand with two different wet grits

3.  Apply final clear coat

I have a gallon I’ll check it out, didn’t realize you can use it on them.  Thnx

I’ll pm you

Purchased a kit in Amazon. Headlight look like new.  About 15-minutes to do 

Thnx 2500 sf of heaven, wife loves it cause I’m in it all day lol. 

Bill I sent you a PM