Grommets for engine door acrylic

[bmulvenna@hotmail.com]

2004 Dynasty. Repainting the rear engine door, as a result have removed the acrylic lift handle. The grommets holding the handle are very worn. Any idea where to get new ones. 

Google searches don't reveal much and NW rv says they don't I have them.

Haven't tried Venuriks yet 

TIA

Mike

 

[pwhittle]

On our 2005 Signature, they were these:

SBR Rubber Grommet, for 2" Hole Diameter and 3/32" Material Thickness

https://www.mcmaster.com/9600K63
 

Paul

[Cousin Eddie]

8 hours ago, pwhittle said:

On our 2005 Signature, they were these:

SBR Rubber Grommet, for 2" Hole Diameter and 3/32" Material Thickness

https://www.mcmaster.com/9600K63
 

Paul

Paul- That looks like what I would need for my 2003 Dynasty but I noticed that the spec sheet says “not for outdoor use”. How have they held up?

[bmulvenna@hotmail.com]

11 hours ago, pwhittle said:

On our 2005 Signature, they were these:

SBR Rubber Grommet, for 2" Hole Diameter and 3/32" Material Thickness

https://www.mcmaster.com/9600K63
 

Paul

Thanks Paul, I will check them out.

[pwhittle]

They have been on for 18 months now. They have some cracks, but I think I bought 10, so I can change them out soon.

I also changed the way the chrome tube is held in there using hose clamps, so they will be easy to change.

Paul