Jim Dinwiddie Posted April 22 Share Posted April 22 I'm not getting water to the refrigerator, all valves on the, manifold appear to be open, but the label telling what each valve controls is missing. Can someone with a 2007 DYNASTY take a picture of valve layout? TIA Link to comment Share on other sites More sharing options...
Twomed Posted April 22 Share Posted April 22 PIC sent in a message 🙂 Link to comment Share on other sites More sharing options...
Doug and Nicki Posted April 22 Share Posted April 22 I have a 2008 Dynasty. The water line for the refrigerator is clearly visible if you remove the bottom panel on the exterior wall at the refrigerator location. You may want to see if there is water getting to the refrigerator. If so, then you likely have a defective valve in the refrigerator that will not allow water to exit. Link to comment Share on other sites More sharing options...
Jim Dinwiddie Posted May 22 Author Share Posted May 22 Just FYI, I finally got water to the ice maker. What I found was the water filter in the refrigerator was broken and not depressing the valve that lets water flow to the cold water outlet and the ice maker. $57 dollars and a new filter and we have ice. Thanks for all the pointers on where to look. Link to comment Share on other sites More sharing options...
MHRookie Posted May 23 Share Posted May 23 My 03 Dynasty has the water manifold labeled but there is also an on/off valve in the basement. Mine is located directly under refrigerator when slide is in. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now