rpasetto Posted July 23, 2020 Share Posted July 23, 2020 I removed the preflter screen (300200) of the Racor 90S1230c filtration system on my ISM500 and found lots of gunk. Monaco owner manual says to clean in solvent but doesn't say what kind of solvent to use. I don't know how long this has accumulated. First time I had the filter element changed the mech. left this alone. That was 2k miles ago and it didn't look that bad from the angle where I could see into it. Has anyone with this Racor-300200-pre-screen had this much gunk in it? Monaco owner manual says to clean in solvent but doesn't say what kind of solvent to use. Link to comment Share on other sites More sharing options...
Just Jim Posted July 23, 2020 Share Posted July 23, 2020 I just replace them. I suppose you could gas or kerosene to clean it, but that seems like a pain. Part number is Parker 300200. Jim Link to comment Share on other sites More sharing options...
DavidL Posted July 24, 2020 Share Posted July 24, 2020 Gas / Kerosene / parts cleaner / dawn That's really not a lot of junk...think about how many gallons of fuel amounted to that amount of gunk. Link to comment Share on other sites More sharing options...
rpasetto Posted July 24, 2020 Author Share Posted July 24, 2020 13 hours ago, Jim Bob said: I just replace them. I suppose you could gas or kerosene to clean it, but that seems like a pain. Part number is Parker 300200. Jim Thanks. I found a few sources for that Parker 300200 part. It's on my next filter order list. I;ll clean the old one as best as possible and hold on to it as a spare until then. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now