pwhittle
-
Posts
341 -
Joined
-
Last visited
-
Days Won
11
Content Type
Forums
Downloads
Articles
Gallery
Blogs
Events
Store
Posts posted by pwhittle
-
-
My skylight has been looking the worse for wear and I broke it cleaning the coach. I was able to Eternabond it back together for the current trip, and started looking for replacement parts.
Originally it was a smoke outer dome, a clear, pebble finish inner dome, and an inside garnish piece.
The part numbers match a 22x30 and I see Specialty Recreation has replacement parts.
SL2230S is the smoke outer dome (also available in white as SL2230W
http://www.specrec.com/skylights/rectangular-skylights/SL2230S
N2230 is the clear inner dome
http://www.specrec.com/skylights/rectangular-skylights/N2230
N2230D appears to be the inner garnish including a clear inner dome and looks like it is an alternative to using N2230 and keeping the old inner garnish.
http://www.specrec.com/skylights/rectangular-skylights/N2230D
Has anyone tried these parts, especially the garnish incorporating the inner dome and not installed the separate N2230 inner dome?Paul
-
Hi Trae,
By the time I put a kit together and be ready to support owners, it was more costly that the individual owner exposure.
I did help one owner whose CPU was damaged by water intrusion. It was a 2006 Signature, and I had a backup from another 2006 Signature that I was able to program into a replacement CPU and bring his motorhome back to life.
I do have backups from a 2009 Navigator and a 2009 Signature, so likely we could recreate yours.
A couple of other options:
If we are ever together, I will make you a backup. I am in the Woodstock, GA area.
if you wanted to take out the controller and send it to me, I’ll make a backup and send it back to you.
Paul Whittle.
-
They have been on for 18 months now. They have some cracks, but I think I bought 10, so I can change them out soon.
I also changed the way the chrome tube is held in there using hose clamps, so they will be easy to change.
Paul
-
On our 2005 Signature, they were these:
SBR Rubber Grommet, for 2" Hole Diameter and 3/32" Material Thickness
https://www.mcmaster.com/9600K63
Paul
-
Hi David,
I replied with details via PM.
Thanks!
Paul
-
-
I love your posts Vito!
So much information for the other members to benefit from.
Thx Mate.
Paul
-
You can check the pressure by replacing the nozzle with a pressure gauge and turning it on. I took an old nozzle and drilled/tapped it with NPT and then some adapters to a pressure gauge.
Good luck with the project!
Paul
- 1
-
14 hours ago, MDezot said:
I just bought a 2006 Columbia and I’m having a problem with the board on the 3110. Are theses replacement boards still available?
Thanks Mike
Hi Mike,
Is that a Renegade? That would be a first for me!
I sent you details by PM.
Paul
-
That look like they are coming from the camera to indicate how far things are away.it doesn’t make sense that they overlay something from the Aladdin, so there must be a setting in the monitor to turn them off. Tim will know.
Paul.
-
Check that the Jake/engine brake switch is off.
Paul
-
The smart wheel controller output for Cruise On/Off on ours was not working. I don’t think the light on the dash was on though. On ours the dash gets that from the J1939 bus from the engine/transmission via the Faria Beede Gateway that drives the gauges.
I replaced the relay on the Smartwheel controller, but that did not fix it so I wired a 12V powered supply through a fuse to the Cruise On output from the Smartwheel, so my cruise is always available to be engaged.
Paul
-
That Sony 6-pin connector that looks like an S-Video is not an S-Video. It is Sony proprietary. Tim at RVCams has had some made for his adapter cables.
On our 2005 Signature the other end of that cable is an audio in RCA and video in RCA from the Aladdin, and an 8.2V power out that powers the rear Sony camera.
When I replaced my Sony monitor with another RCA compatible monitor, I put in a voltage converter to supply the 8.2V to the rear Sony camera.I just replaced the rear camera and cut the Sony connector off that cable and attached a 4-pin aviation connect to adapter the existing rear camera wiring to the new wiring. I also removed the 8.2V converter and wired 12v to the connector for the rear camera
Here is what is left of the cable and the part number 38031333a.
Paul
-
We’d have to bring Frank McElroy in to have a hope of fixing it! 😀
I do have an extra Magnum Opus, but I am not sure it makes sense to put one in where there was not one before.
Paul
-
Hi Walter,
Thanks for your kind words. I never imagined deciding to make my own toilet controller instead of replacing the toilet would have turned into what it has.
About the only thing we, as a group, haven’t been able to fix is the Kongsberg chassis multiplex.
We have to keep these great motorhome alive!
There are a few more projects on my list that may be of interest to others! Just finding it hard to make the time.
Paul
-
Great to here you are in business again!
Thx for the update.
Paul
-
If no water comes in, that could be the control board, but may be a different problem like a loose wire or just the water valve that needs replacing.
Do you have a multimeter and a comfort level using it to do some troubleshooting?
Paul
-
Hi @Bandit411,
@Chuck B 2004 Windsor will be along in a bit to tell you that there is no need for a fancy electronic toilet, but many of us think they are great!
Your issue where the flapper stops operating is the most common symptom of a failed control board. I’ll send you details on how to get one of my replacement boards for the 3110.
Before we do that, move the right hand switch on the control board to the left hand position, Service Mode. This will clear any faults and will try to open the flapper . If it does open, then returning the right hand switch to the middle will close it and you will be back in business. If the Service mode doesn’t open and close as expected, it is likely the control board.
Paul
- 1
-
Hi Mike,
That is the same Dialight manufacturer data sheet that the second Mouser link above goes to.
I wonder what the Prevost people are doing for replacements?
Paul
-
-
1 hour ago, jreich888 said:
One word of warning for the ABS prints, I've found unprotected ABS will get brittle with UV damage after time. You don't mention if you painted your mounts or not, but you may want to get some paint on them to protect them.
I have not experienced that yet, but will keep an eye out for it.
it will be easier to reprint them than paint them. :j
Paul
-
Hi All,
I posted a DIY solution that most of us should be able to do if you have, or know someone that has, a 3D printer to print the mounts. Everything else is easily available.
Paul
- 1
-
Hi all,
The third brake light on our 2005 Monaco Signature started going out (again) and it is no longer available. I replaced it once not long after we bought the coach with the same original part from Veurinks, and after it faded, I painted it with a red plastic lens paint to restore the red color. Then it cracked in the middle and the individual LED's started burning out.
Part number from Owners Manual: MP#16620607 870 51-R
Rev Parts Link: LIGHT, BRAKE THIRD | REV Parts Store (revrvparts.com)
Mouser Link: https://mou.sr/3m76ErY
DataSheet link (See Page 13): https://www.mouser.com/datasheet/2/109/Vehicle_LED_SelectorGuide-50899.pdf
I had already added a brake light flasher to the circuit for the third brake light so that it will flash four times then come on solid when you apply the brakes. That had required opening up the hole for the wires and the flasher to pass through. The SAE connector was installed at the same time.
I 3D printed up some mounts and used a YW aluminum LED Channel with a LED Strip. in the mounts I included a recess for the clip that comes with the YW channel. I also used the end caps that came with the YW channel.
The hole in the 3D model is sized so that the 3mm machine screws will cut a thread in the mount. After printing the mounts, I used 3mmx3 machine screws to attach the clips to the mount, and installed the mounts in the original holes on the coach. On our coach I had to grind away some of the back end of the left mount as the recess was not flat in the back. Once the mounts were in place I measured between the two raised ends and got 16 1/4" as the total length for the channel. I took off 1/16" for the width of the end clips and cut the YW channel and clear cover at 16 3/16" on my vertical bandsaw.
The LED strips have specific locations where they can be cut, and you can add power to anywhere on the strip. These are marked with copper pads under the silicone waterproof layer. On the strips I used, they were every 3 LED's or approximately 1".
I cut one end of the strip on the copper pads and laid it in the YW channel, then cut the other end at the last set of copper pads on the YW channel and counted to find the middle set of copper pads. On ours, there were 16 sets of 3 LED's so I marked the strip on the 8th set of copper pads, centered the strip on the YW channel, and marked the YW channel to match that location.
I used that mark to drill from the outside of the channel parallel to the base with a 1/8" drill to make a hole that I could pass through the 16ga wires I was using to a two prong SAE plug. i would have used a 7/64 drill and an 18ga wires if I had them, but I have linked that below in the supplies. I deburred the hole with a small round file.
I carefully removed the silicone from the LED strip to expose the central copper pads for soldering. I used a razor blade to cut the silicone just inside the LEDs either side of the pads and then was able to peel away the silicone. (This was a test cut on a shorter piece)
I cleaned the YW aluminum channel and stuck the LED strip in place starting in the middle to make sure to align the central copper pads with the holes. I tinned the copper pads (used flux and solder). I stripped 1/8" from the end of the wires, passed them through the holes, and soldered them to the copper pads on the LED strip, being careful to connect ref to +ve and black to -ve. I checked to make sure that neither the +ve nor -ve was shorted to the YW aluminum channel. Note that if I tinned the wires before passing through the hole, the insulation swelled with the heat and would not pass through the hole.
I covered the soldered pads and the area I had removed the silicone from with fresh silicone, and applied silicone over the wires on the back as they exited the channel. I also filled the hole in the end caps with silicone.
I sprayed the clear LED strip cover with red lens paint to have the red appearance as original. You could also leave it clear.
Here it is installed.
And running with the hazard flashers. the third brake light will flash 4 times and then stay on normally, but I did not start the coach so I could press the brake pedal.
Sources for parts:
3D Printed Mounts: I printed these in white ABS with 100% infill.
YW Channel: I ordered mine from China on AliExpress. I do see some on Amazon and eBay, but they all seem to be shipping from China. They come with options for clear and milk lenses, and we want the ones that have two clips and two end caps as we use them. The clips I received and what I made the 3D Printer mount for are 9mm wide.
AliExpress Link: https://www.aliexpress.us/item/2251832693313513.html Select YW Style, 50CM Transparent
LED Strip: https://a.co/d/1SZPTxm
Red Lens Paint: I used VHT888 Nite-Shades Translucent Red lens paint. It does not appear to be available any more, but there are likely other products out there.
Brake light Flasher: https://a.co/d/7DR5Jms
18ga SAE Extension: https://a.co/d/6ST2xE7
Paul
- 2
-
Files for 3D printing are posted.
Intellitec Support - CPU and Keypad backups and restores
in Audio, Video, & Electronics
Posted
Hi Bill.
I cleared out my inbox, so PM's should be available again.
Windsors typically have a system without a CPU to backup. The Intellitec functions are often limited to controlling lights and fans, and they just use switch settings to set the address on the output modules and program the switch panels to the same addresses and outputs. The Multiplex bus master signal can come from the power shedding module, or a separate Bus master Module.
Paul