Just Jim

so... you guys that have cut and altered your cabinet... what did you use to cut it? I would imagine a very straight cut is going to be needed to get it to look right when you match the pieces back together.

Nice looking job Dennis, However my old TV is a tube type and the cabinet is about 20 some odd inches deep, so mounting a flat screen to the front is going to look pretty silly.

I've taken the TV out, and there are square pieces of wood that are in the joints where the sides and front come together. I've removed the screws from those braces and it is still not moving. I think it may be glued together?

My question is.... how do you get that cabinet out? I've looked at it and really can't find where it is attached. I've considered cutting it in place, but have not gotten brave enough for that yet. 95 Dynasty with the head knocker on the left over the drivers seat.

I have a 95 dynasty and I am the only one that can open the door from the outside. Its a technique of pulling the handle and also pulling on the door at just the right time for it to open. The door opens easily from the inside. From the outside, lots of people pull on the handle and just assume its locked because it does not seem to activate the latch. Anyone have any idea what might be wrong with it? Also, the two PDF files in the post up above look very similar to mine. Any idea if they are the same for my year model? Thanks in advance, Jim

I don't know about compressors, etc in a fridge, but computers and other electronics like pure sine wave energy. In my mind I would think you would need a inverter larger than 1500 watts and you also usually see people add batteries to the bank as well.

Sorry, I searched the site using the box at the top of the screen and after I posted I noticed another post with the same topic. I found some good suggestions in the other thread. thanks, Jim

I have a 95 monaco dynasty that the air intake hose that leads from outside to the air filter has disintegrated. I have searched auto parts stores and online but cannot find a suitable 6 inch hose. I need about 10 feet. If anyone has a suggestion or know a website I would appreciate the help. Thanks, jim