Bill C

Ivan K, that picture was perfect. My Block and Aqua Hot relays are right where you said they should be.

Thanks,

Bill

Thank Jim, although I can see nothing in my unit that looks like your pic.

Where is the relay located Jim?

Thanks Tim-AZ

Anyone know where the relay is for the aqua hot electric heating element on a 2001 Dynasty?

I hope I am looking in the right place for my problem. My diesel burning for my Aqua Hot has not worked for several months now, but I am away and can't get it fixed right now. We have been using the electric element, which is OK for showers, but now that is no longer working.

Any suggestions would be most appreciated.

Thanks,

Bill

I forgot to mention that the connection for the starlink is temporary. Each time I move campgrounds I have to disconnect it.

I also ordered a flagpole to mount it on, and like the idea that JohnC3 posted:  I will run it in the top seal of the slide.

FYI: The wire from the Starlink is not coax, so running it using the outside TV coax will not work.

Thanks for all the good suggestions.

Bill

I recently purchased an RV Starlink WIFI system and was wondering if anyone had any good ideas on how to run the cable from the Startlink Antenna to the Receiver inside the coach, beside running it through a partially opened window?

Thanks,

Bill

I would think that you could unscrew the moving part that the handle goes on and replace the rubber part  (could just be packing) inside.

It's worth a shot.

Bill

Glad I could help

Here is an electronic copy, I forgot I had it.

2001 dynasty wiring diagrams - like in my book.pdf

2001 dynasty wiring diagrams - like in my book.pdf

I have one in hardcopy. Where do you live?

Do you have a washing machine? If so, there is an check valve that keeps odors from coming back from the grey tank. If it is not working properly you will get bad odor from where the check valve is (usually behind the washer).

THANK YOU Stephen, I will try that

I could not figure out which wires in my old system were used for propane. It's been a while, but as I recall, I disconnect all the wires and none affected the old system's ability to accurately measure the propane level.

Attached is a picture of my old system. Anyone know the wires in this panel that go to the propane tank sensor?

Has anyone figured out how to make the propane gauge/level work on the Seelevel system?

I have an 01 Dynasty.

IMO, the factory tank sensors on most, if not all, RVs are not worth much, and are never accurate. I installed the Garnet 709 SeeLevel II 3 Tank Monitoring System and love it. It is very accurate and when dry camping this is very important. Here is a link.

https://www.rvupgradestore.com/Garnett-Technologies-Model-709-SeeLeveL-II-p/709-1003.htm

Bill

Still for sale in case anyone is interested

TripTek Model 3000 

Thanks for sharing the link

Bill

14 minutes ago, Michael Powell said:

Thank you so much Ivan..Have a great Memorial Day..God Bless..

Michael and Terry Powell

Hi Mike,

  There appears to be 3 O-Rings in your pic, aren't there only 2 O Rings on the valves?

That would be good. We ride a motorcycle. Maybe we can come over to that area for lunch?

Perhaps you can PM me with your cell so we can text?

Do you live in Hiawassee? I am in Franklin, NC

I purchased the MOFI 4500. I am using my ORBIC sim card as Verizon freaked out when I tried to add another hot spot type of device. I then set the TTL to Lunix-2 65, set the APN to verizon, and set the VPN to IPV4 and sure don't see any improvement over my Verizon ORBIC hot spot speed.

Am I missing something?

On 5/10/2022 at 9:02 AM, Scotty Hutto said:

The only modem settings I changed from the default are:

APN fast.t-mobile.com

TTL 65

iPV4 only 

Is that what you were asking?

On 5/8/2022 at 9:18 PM, Scotty Hutto said:

Follow-up… A few weeks and 88Gb later. Speeds are still fantastic, still with only 2 bars service (my phone only has one bar) with only the standard paddle antennas. Proxicast antenna not hooked up yet…

No throttling or slowdowns so far.  I have about a week left in the billing cycle…. We’ll see what happens if I exceed 100 GB…

 

 

Hi Scotty,

What happened when you exceeded 100 GB?

Yes thank you

Thanks Ed