2004 sceptor Posted March 29, 2022 Share Posted March 29, 2022 Hi , I’m working on a 2004 scepter and one of my slide floors is delaminating . The floor appears to still be structurally sound the wood is not soft but the fiberglass skin is separated on the front and rear edges . Just wondering what type of glue would be recommended for the repair. Thanks in advance any information would be appreciated. I am mechanically inclined but I don’t know much about carpentry Link to comment Share on other sites More sharing options...
denny53 Posted March 29, 2022 Share Posted March 29, 2022 if the problem is the bottom of the slide corners you should lookup Talin RV .they have stainless steel plates that will fix that Link to comment Share on other sites More sharing options...
Ivan K Posted March 29, 2022 Share Posted March 29, 2022 There are delamination repair kits, pretty much just a slow curing, thined epoxy that soaks into the damaged wood layer to make it stronger than new and bonds the outer layer to it. Need to clamp and support it the way it's gonna be, there's no fixing it later. There are also non-RV specific options that do the same for less. Push it into tight spots with a syringe or squeeze bottle and a tubing for spot repairs. That's what I would do if it's only a partial delam. Guardian plates over it and call it good. Here is what I used with success on a project. Link to comment Share on other sites More sharing options...
2004 sceptor Posted March 29, 2022 Author Share Posted March 29, 2022 42 minutes ago, denny53 said: if the problem is the bottom of the slide corners you should lookup Talin RV .they have stainless steel plates that will fix that Ok thank you I will look them up , do you have any pics of there finished products? Link to comment Share on other sites More sharing options...
JDCrow Posted March 29, 2022 Share Posted March 29, 2022 Did Talin Plates myself. Easy to do Link to comment Share on other sites More sharing options...
2004 sceptor Posted March 30, 2022 Author Share Posted March 30, 2022 12 hours ago, JDCrow said: Did Talin Plates myself. Easy to do Thank you these were helpful Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now