Sanicon Fuse/Breaker

[allphase8]

Still trips OEM circuit breaker if run more than a couple of minutes.

 

[Happycarz]

Maybe the early high output Sanicon’s didn’t use a relay like mine has. I’m assuming that they did, like the Turbo’s do.  Tom should know as he put one in some years back. I’ll have to look at his file.

You definitely need a 10ga wire to the pump, and a relay to take the load off the switch.

[windsorbill06]

2 hours ago, allphase8 said:

Still trips OEM circuit breaker if run more than a couple of minutes.

 

So you got the 10 ga wire run, but you’re using the oem breaker?

 

that  OEM breaker is only rated for 15-20 amps.   It was designed to protect the 12 ga wire.  

[allphase8]

Just got the parts to run the 10G wire today.

A chore forr after the rain quits in the next couple of days here in sunny So Cal.

[windsorbill06]

1 hour ago, allphase8 said:

Just got the parts to run the 10G wire today.

A chore forr after the rain quits in the next couple of days here in sunny So Cal.

I’m in palm desert.   No rain here. 

[96 EVO]

24 minutes ago, windsorbill06 said:

I’m in palm desert.   No rain here. 

It was overcast though.

Just finished watching Indian Well's final 😮!