Front Line Mfg. Wipe molding

[brokenarrow1244]

Looking to replace the wipe molding on the shower door bottom. Have found several of them but all are the wrong material and too thick and too firm. The molding is very limber and must have enough flex to allow the door to close. All I have seen just jam the door when closing.

Any ideas or known parts supply would be appreciated. Tried Lowe's and Home Depot 

[Gary 05 AMB DST]

I believe that Front Line is the manufacturer of the fiberglass shower assembly.

Gary 05 AMB DST

[jacwjames]

Here is a source with lots of options.

https://www.dkhardware.com/search?keyword=shower door wipe

You'll have to refine the search to find what you need.

[windsorbill06]

Take that clear plastic piece down to a glass shop that does shower door enclosures.  Any good shop will have several different profiles and you can match it up.

I just did that on a shower in our house.

[brokenarrow1244]

I will look for a glass door shop and see what I can find. So far ,nothing has been found that will work as a replacement part.

It seems that the major retailers like Home Depot, and Lowe's have reduced the availability of more personalized services. 

[windsorbill06]

On 4/22/2023 at 11:21 AM, brokenarrow1244 said:

I will look for a glass door shop and see what I can find. So far ,nothing has been found that will work as a replacement part.

It seems that the major retailers like Home Depot, and Lowe's have reduced the availability of more personalized services. 

Yea,  for something like that, HD or lowes are both worthless.  Maybe try ACE or TrueValue, (or whomever in your community)  but my  suggestion of a shower door/glass shop, would be my 1st choice.