4rickyg

I found it. There was a fuse in the front run Bay, Had to take my time and look through every one of them. Lol. Thanks for everyone's help. But I did learn that now my LED clearance lights don't Flash with the emergency flashers.

Can not locate any other fuse boxes that say Monaco 1 and 2 In the front electrical day. Maybe I will look under the dash tomorrow.

Do you mean in the front electrical Bay by the driver's side front tire?

2005 Navigator. Was changing my clearance lights to LED's. I Accidentally touch the wires on the clearance lights above the windshield. Figured I blew a fuse. All the marker lights on the top of the coach front and back are out. But bottom marker lights headlights and tail lights are all working. Cannot find a fuse blown?

I was always afraid to put these quick fix sealants in my cooling system. Thought it would mess something up or give me some other problems??

That is exactly how mine looked. I drove it for a couple years like that probably 20,000 miles, Just kept an eye on it. It finally started to leak on a trip from Florida to Michigan ,1200 miles. Was a very small leak. I just had to top it off about every 6 hours of driving. I would not start to repair it until you have plenty of time. Seems like everything takes about 3 times as long to get done nowadays. I would also stay away from the place in Alabama.

Thanks for the replies. That was my plan. Leaving in the morning for a 500 mile trip to Raleigh North Carolina. Will address it when I get back🤞

That's what I was thinking..

Just found this. Looks like time to start replacing? Probably original 17 years old.

Does bluefire and silverleaf just show the same info as my Aladin, or something more? 05 navigator DD 60. Thanks

Just changed my oil and all filters for the first time. All went smoothly, glad i took the time to do it myself. Now i need to learn how to grease it? Don't want to miss anything. Is there a chart or diagram in the manual? Should I get a air grease gun,and 3 pumps per zert? Thanks for the advice.

Yes that might be my only option. I talked to him about that. I forget what he quoted me for the 2 of them but it was pretty expensive...

Does anyone know where i can get a vorad side sensors? I need the diamond one. 05 Navigator. I tried vison rv salvage, but no luck. Thank you.

Just wanted to give an update to the resolution. Josam's replaced the ride height control valve in the front, and adjusted the rear. Now everything is riding as it should. It also fixed my air leveling problem somehow... lol!

I definitely know my 6 packs are leaking.. But I don't Think that should affect travel mode?

That's good to know. I didn't know they worked on the HWH system. Sometimes I feel like I drive those guys crazy with little problems lol

All the bags have air in them. They are not soft, The rear are completely extended at 12" and the front are only at 6"

I have measured the correct spot in between the plates. So something must be wrong with the ride height adjustment, or maybe the ride height valves are worn out? I have not tried the reboot of the system not sure how to do that. I guess I can dig into the manuals. I would love to go to the factory and have them fix it, but that's a long ways from Florida.. And I don't ever seem to get in that direction.. I have a appointment at Josams in Orlando on Tuesday.I can always have them look at it if I can't figure it out.

Everything seems to be Working correctly with the control panel. All of the buttons operate the raise and lower correctly. When I put it into travel mode The front air bags are only expanded to 6". And the rear air bags are expanded to 12" which I believe is Total capacity. My manual says front and rear should both be at 9". I checked the ride control arms.. They seem to be working correctly. I. I tried to raise the front and it did but as soon as I push the travel mode button it went back down to 6". I have not touched the back yet. Does travel mode override the right control height valves?

Everything seems to be Working correctly with the control panel. All of the buttons operate the raise and lower correctly. When I put it into travel mode The front air bags are only expanded to 6". And the rear air bags are expanded to 12" which I believe is Total capacity. My manual says front end rear should both be at 9". I checked the ride control arms.. They seem to be working correctly. I. I tried to raise the front and it did but as soon as I push the travel mode button it went back down to 6". I have not touched the back yet. Does travel mode override the right control height valves?

Radiator project finally completed.. Had the radiator recorded At Marion radiator in Ocala Florida. $3400 they did a good job. Probably another 1500 in rad.hoses and clamps, To new hydraulic lines. New hydraulic fluid, filter and coolant. I didn't total it all up yet but that's a ballpark. It was a huge job. Definitely takes 2 people and a lot of tools. I'm glad it is over and I am satisfied with the results. Now onto the rest of the list that needs to be completed. I will start a new thread about my hwh Ride height issues. Thanks for everyone's help on this😊

Having mine rebuilt at a local radiator shop with copper. They quoted me 2800 for the rebuild, A place in Alabama quoted 3400 for a new aluminum one. I Figure I would be better with the original steel. Haven't got it back yet. Will update when I do.

Hello Chargerman, I have an 05 Navigator with a Detroit series 60. I'm in the process of removing the radiator right now to get it rebuilt, and I am really struggling with it.. lol. I have everything unbolted and all of the hoses are disconnected but when I went to drop it down the neck on the CAC won't drop below the mounting frame? Did you separate the fan and shroud and CAC from the radiator before you drop it down? Or did it all come out in one piece? Thank you very much any info will be very useful.

With your 12 V AGM's do you have 100 AH or 200 AH? And just 2 with a residential fridge?

Yes, I know my problem was lack of maintenance. I have never been good at that with the batteries. I will look into pricing AGM's around here. Not sure if I have the correct charger inverter? I think mine is original?I will look tomorrow to see which one it is.