Jump to content

Johnny Mo

Members
  • Posts

    63
  • Joined

  • Last visited

  • Days Won

    2

Johnny Mo last won the day on May 3 2023

Johnny Mo had the most liked content!

Required Information

  • FirstName
    John
  • Make
    Monaco
  • Model
    Signature
  • Year
    2007
  • City & State
    Norco, CA

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Johnny Mo's Achievements

10

Reputation

1

Community Answers

  1. A Sig does not need a steering stabilizer…. How old are your steer tires ? When I first drove my Sig for the first time I thought it was out of alignment, pulled hard to the right. New tires it drives straight, had it aligned anyway….
  2. I recently had my windshield replaced. I didn't like how the rubber gutter above the windshield looked, just like yours Jeff. So I took it off and re-applied it. I stripped off the old mounting tape from the rubber and applied 3M VHB HD mounting tape. I recommend using 3M Tape Primer on the rubber before applying the tape and on the fiberglass otherwise it will not stick very well, mainly to the rubber. When you attach the rubber leave about an 1/8" gap so you can put a bead of urethane sealant. I used what the installer used, Sikaflex P2G. Use masking tape and take your time applying urethane, you do not want to over do it as it is very messy. I used spray foam window cleaner after applying a bead and tooled it with my finger. I bought everything off Amazon
  3. I replaced my controller March 2022, Danfoss 1163020 Radwell International NJ, 800 332 4336 $2300.00 You can send them your Fan Drive Control and have them rebuild it....
  4. That is a gas... Sorta reminds me of my first RV 🤣
  5. Ditto on the Engine Brake, my first coach had an exhaust brake also... night and day difference.... I also watch the wheels on truck/trailers as they pass, or I am passing. Specifically the steer tires, if I see that they are crossing the line and not correcting I will give a short blast on the horn.
  6. To remove the Shackles on the mud flap Put a crescent wrench on the flat part of the pin, lefty loosie if too tight, use a second crescent on the handle of the first
  7. I have a good-working 15000 ac with heat pump, that works on the 5 button thermostat. If you are interested….
  8. I’ll take the drain kit What State are you in ?
  9. Vito, I don't quite understand your Aqua Hot question. But yes, My AH works fine...
  10. I replaced 2 of the 3 Dometic 15000 AC's. Only One of the three was bad, so I replaced the 2 that share the same thermostat along with a new t-stat. So I have 1 good and 1 bad unit along with a 5 button thermostat for sale. $200.00 Will not ship, I live So Cal
  11. I recently replaced the Booth Dinette and Jack Knife Sofa with a Table and Computer Desk, from Brad and Hall. I had a Table and Desk in my last coach, not a fan of Booths (maybe because my body is not booth friendly). And also I really missed not having a Desk. Still have the Booth Dinette and Sofa for sale.
  12. Recently I had been working in the front run box when I noticed water all over, top to bottom. I had washed the coach a couple days prior. So I got to work with compressed air and a towel, it looked like the door was open while washing and got sprayed (it was not open). Water was dripping off the bundle of wires at the top of the box, running down the circuit boards. I could not find anything wet on the outside top or the sides of the box. As I was finishing wiping and still wondering how water got in there, I just happened to wipe the door seal from the bottom to the top and water shot out the top of the seal like a hose. The seal is round and hollow like a hose, It is one piece with the ends facing up on the left and right top corners of the opening. A flat seal runs horizontal at the top. So I plugged the ends with RTV. I believe the seal filled with water while washing the coach. So while working in the frb wiring new running lights, opening and closing the door water was squirting out of the seal. The door hinges at the top and latches at the bottom. So when I close the door I push it in tight with one hand and latch with the other. Hence the water getting push out. I know that all the these coaches are different, but check how your seals are installed...
×
×
  • Create New...