astgerma

What is the problem with Marinco BEP battery switch.

Thank you, I'll look into that direction.

I am interested in changing out my magnadyne m9900dvds as it is the second one that I have and does not work. It lights up but nothing happens. Looking for alternate radios that will fit in the hole or have an adapter plate for a new radio. would be pleased to see what other have done.

I went through all of the above steps and at the end it was the burner that had o hole burnt out of it due to 10 years of use. I replaced the burner and all was well.

I had a problem with my furnace not igniting and the reason was the burner was burnt out . I am including a photo of burnt out buner.

Best thing I ever did was to remove my sanicon after it broke. Love the fast flush and rinse. Not sure why I had ordered it in the first place. It's major use is if you have to pump out going uphill.

I have used : Orange-Sol De-Sovl-it Contractors Solvent 10131 33 OZ https://www.amazon.com/dp/B000P0MJRC/ref=cm_sw_r_cp_apap_HzCJhoTHs4EgM It worked great. But cover and tape over your head lights or it will damage the plastic lights.

Does this guy have a name and town ???

You could take a look at your electric step mechanism. could have come from there.

Take a look at the problem I had with 12 volt lighting on my full wall slide. Mine was a bad connection in the 6 pin connector in the bundle from chassis to slide.

I will look for it when I go to Lowes or Home Depot. Thanks for the recommendation. Andy

Okay, I think I will do that. Thank You.

Thank you all for the many suggestions on my 12 volt problem. In my trouble shooting, I took a ground wire from my battery post to the light switch and nothing happened. Still no power. Then I put the wire on the positive post and to the light switch and now i had lights. Now knowing I was looking for a broken 12 volt positive wire. Removed the sofa to have access to were the wires are hooked up on the slide. Removed the plate for 12 volt connection's only a mess of wires there. I cut a new 6 by 6 inch access hole in the wall, slightly to the left and above the original access opening. There I found a 6 pin connector for 12 and 120 volt wires. The 12 volt pin showed burn marks at the connector. I spread the pin open to make a better connection and assembled back with dielectric grease. All is well now!!! Including pictures of pin connector.

Yes I understant but keep in mind the lights are not working , acts like a bad ground. So if white wire is used for both hot and ground it may be difficult to tell the difference. I will try testing as you suggested tomorrow. Thank you for your assistance.

If white is ground and also power, how can you tell the different.

The 12 Volt lighting above my dinette and sofa are not working. I have looked behind the fixture and there are a mess of white wires which I think may be the ground wires. Hope someone can explain the system and help me diagnose it . If I move these wires sometime the lights will light but not stay on

Thanks for the info.

I have a 2007 Monaco Monarch with a workhorse 8.1 engine. Can you tell me what is the best oil filter to use Brand and number Thank you Andy

I was able to purchase the flush valve assembly at Walmart.com