Gary M

As of 01/11/2020, found Lippert Brain 🧠 that Lippert said did not exist. Just needed 5amp fuse and two rear slides came alive. Replaced hydraulic pump motor and now front slides and jacks all working. In actuality the brain was a small circuit board located in battery compartment and was made by IDS of which Lippert purchased in 2014. Long Explanation: I was changing a lighted rocker switch to my water heater. Unplugged molex connector that powered both rockers for wtr htr. Changed rocker (success). About to put panel back when I heard a loud whining noise in bedroom area and burning smell, then overhead lights started to flicker. It was the inverter screaming for some reason so first I shut off both battery cut-off switches then shut down shore power. Power at box good, batteries voltage good, turn 12v back on(all good), checked ATS(all good), shut all 110v breakers off, plugged into shore power, ATS power good, 110v main on along with all breakers except inverter(all good), inverter breaker back on, sounds normal but absorb charging at 13.8v which its never done before. After about 10 minutes it settled back to float at 12.7v. All seemed good so exited coach to track burnt smell. Noticed rubber cap for hydraulic motor on ground. Opened door to put cap back on and burnt smell was weak but in that general area. No power to pump. 150 amp resettable break popped. Reset, checked power to pump motor good. Oops! Slides do not work! Wiring diagram shows 30 amp breaker that powers Lippert Slideout Brain. Thats good but where’s the Brain??? What else should I do or look for? TIA

Thankyou Frank Glad its turning out ok. Steve Alls turning out ok. Frank has been in touch with him.

Thanks Frank Mel S posted instructions on how to sign in and I also emailed him (Tom) a copy.

Yes. I was hoping by posting screen shot of his info that moderators would help him. But after 5 days of no replies from moderators to my post and directly emailing Tom Cherry and Scotty Hutto with also no response, I then posted this one. Thanks Mel Ill see if I can copy and get this to him. PS: Does anyone know of how many of the 5K members actually made it over to the new site? Just curious. Its been 5 days since I did the contact us feature and no response.

Well he was on old site while I was communicating with him 5 days ago. He was on old site and going down with the ship trying to get to rescue boat.

He trying to access Monacoers.org. He has tried unsuccessfully. Thats why I put his contact info in a post. Thankyou He trying to access Monacoers.org. He has tried unsuccessfully. Thats why I put his contact info in a post.

I posted 4 days ago to hopefully get moderators to help a stranded Monacoer (Tom) who could not sign in to the new site some help. Ive had 60+ views but no replies. I also sent personal emails through this new site to Scotty Hutto and Tom Cherry, hoping maybe they could help. I am not sure if the personal emails worked. I hope this post get a moderators attention so that he can be helped. I believe I titled it “Monacoer Stranded on Yahoo Site” but I could be wrong.

Can’t make it to that area till May. If your not out flying, see u then.

Scotty, Tom, Frank etc. I have attached a screen shot of a gentleman that is stranded on the old Yahoo site. Hope someone can help him.

Rich I got mine off Ebay. NWRV supply, Veurinks. Some say even truck stops. Make sure your number of tangs and spacing match.

Scotty Great topic. I have had several electrical issues lately and I have been told to check grounds. In crawling under and around my coach, I can’t believe how many grounds I find. So very interested in everyones ideas.

Doug I don’t know. It still looks like a Knight too me!!

Now I know why I received some personal emails asking me about my Dynasty. I own a Knight. Gary M 09 Knight

Merry Christmas from Ashland, Oregon.

Jim Probably plumbing. Sink drain?

It worked for me till the 5 minute mark

Dan This is a screen shot for an 09 setup. Hope u can see it.

Well maybe you should create a new post .” Edit Test”. Then go back in short intervals at first and try to edit. If u r able to edit, Edit 1- 5 minutes thru whatever till u cannot edit. That will give us all an idea of how much time before we can’t edit anymore. Edit 2 for me - 2 minutes Edit 3 - 4 minutes Not able to edit after 5 minutes

This is a test on editing this post but it looks like just a reply. Ill have to find my post and do the same Phillip. When I posted this reply a edit link came up and I added this.

Ok Scotty Duh! I cant find the signature button. My name is not in upper right hand corner. There is three bars which gets me to Account Settings but no Signature link! Im probably on wrong page. HELP! Duh! Again. I found it.

No recommendations other than these I found in the area. I resealed my own last year. Currently in Desert Hot Springs.

Mine was completely removed and marked to make sure it went back in same position.

Are these what u r talking about?