Bill C

After getting very frustrated I decided to follow the cable and sure enough the other end of the cable came unplugged and I used it to go through the hole and didn’t have to unplug that one that was so hard. I do have to jumper a wire for the one that is broken and that’s gonna be tricky.. Thank you for your assistance

Thank you for the info Van W. on Monday I’m gonna dig into it and I’ll let you know what I find out. Thank you

Does anyone know the trick to unplugging this connector on my Triptek. I'm afraid I will really damage it if I pull or pry to hard (looks like one wire has already some off), but that little sucker does not want to come off. What am I missing? Here is a pic Thanks in advance, Bill

For what it's worth, I have a 2001 Dynasty with the AHE-100-02S model and if I leave the electric switch on, my wife and I can both take showers in the morning without losing hot water. I am pleasantly surprised how well it works, especially after reading the owners manual. While the diesel burning is necessary to heat the RV, the electric part of "my" Agua Hot does fine for morning showers, if left on all night. I am especially glad the electric part of the AH works good, as our Diesel part is hit or miss, even after having it "fixed" on many occasions. Based on my experience with the AH system, I wish I had a regular furnace that I can count on to work when I need it.

I have a 2001 Monaco Dynasty with a 2000 Cummins ISL 370 and 2000 Allison 3000 transmission. I am replacing some gauges with require that I replace the Engine Temp Sensor, Engine Oil Pressure Sensor, and the Allision 3000 Temp Sensor. Has anyone replaced their gauges before, requiring different Sensors? I have two thoughts I need help with: 1. Where the heck are these sensors located? 2. Do I need to worry about the ECM inputs with the different sensors? Thanks in Advance, Bill

If you have a 55-Aquajet-ARV I'll take one that looks and works like new.

Thanks for all the great feedback, I have found the part I needed, and more 🙂 Bill

Wow Richard, I opened the link and found a part for my washer I have been looking for for a year! THANKS for the link

Anyone know where I can get a new half moon hubcap for my 2001 Dynasty? Thanks Bill

Any idea where it might be located, I looked for it but was unable to locate it.

Good info, thanks

THANKS Bob

I am a member of IRV2, do you know the link to his post. I tried searching but could not find it.

Our brakes and parking brake are both air

Has anybody had any experience replacing these? How hard is it? Do I need anything special? My 2001 Dynasty is going on 21 years and I thought it might be prudent to change the air bags now, rather than getting caught on the road somewhere with problems. Although I am pretty handy, I am getting older, recovering from cancer, and a broken back, so I can't get around as easy as I use to. I am thinking of having my son help me but wanted to better understand what I (we) are up against. In addition to my questions, I see several air bag manufacturers of air bags and prices ranging from $134 to $569. Does anyone have any experience with using some of the cheaper air bags like those made by: Automan, Contitech, and Firestone (a little more than the others)? Thanks, Bill

I have a 2001 dynasty with 10 airbags. They look like they need to be replaced sometime in the near future. Has anybody had any experience replacing these? How hard is it? Do I need anything special?

Good info Jacwjames, I found the info, but how do you download the manuals, I could only view them in a browser tab.

I couldn't even find a search feature/window. Can you send a screen shot of the good places to visit?

Thanks again. Would like to know your secret as to how to find all this great info?

Thanks

Jacwjames, I logged in to the site, but can't find what you found. Any chance you can share where you found it?

Good info Jacwjames I will definitely look in to that. Thanks

Wow I never thought about ECM needs. I’m glad you pointed that out. I’ll have to look into that with the guy that sold me the sensors. Thanks for the feedback

I have a 2001 Monaco Dynasty with a 2000 Cummins 8.9L engine. I am replacing my dash with one made by Custom Instrument Panels and while I'm at it I'm replacing all my gauges (especially since my speedometer has never worked right, so I am installing a GPS speedo). Some of my gauges use different sensors than I have now (eng oil sensor, eng temp sensor, and trans temp sensor). I was looking at the engine and saw these three sensors. Does anyone know which one is which? Does anyone know what the one is that has no connector to it? (first two pics) Does anyone know where the trans temp sensor is located? Thanks for any help you can give.

Thanks for the suggestions everyone, I should be able to find what I need at one of these web sites.