Donflem

The generator is not under any real load it’s cold here in Nevada so I’m only using the aqua hot. I’m really just using the generator to keep the batteries up. The brushes I replaced about 7 months ago. Tom I’m curious what board is known for failing? Should I be caring a spare? I’m going to bed will try and figure it out tomorrow. Don

Code 13 is what I’m thinking it says but doesn’t make sense I’ve turned off the breaker and it still stalls it seems like it’s running out of fuel. I can’t imagine a bad NEW fuel filter but it’s possible so tomorrow I think that’s were I will start unless you guys have any other ideas??? Don

Ok I filled coolant no help. The code is 1 pauses then 3. I shut off the breaker on generator still won’t stay running it’s missing so I’m breaking camp to get to hook ups. I’m wondering if maybe a bad fuel filter? It’s crazy every thing is new oil filter,fuel filter,air filter,brushes couple months old . I’ll check back with the group when I get to town. Thanks again for all your support. God bless and happy EASTER. Don

So I started it this morning died right away . I’m only getting 3 flashes on the red light but I did notice no coolant in the tank. I just serviced the generator before this trip so it was topped off. I don’t see any fluid anywhere and of course I don’t have any coolant with me so I’m gonna load up and head to town so I’m close to parts. I obviously have a leak somewhere. Don

Sorry I left out a few details. I’m almost full on fuel the rocker switch on the generator blinks 3 times. I’ll get the manual out in the morning. I don’t want to wake the kids. It starts and runs fine for about 10 maybe 15 minutes and shuts off. Don

I’m dry camping about an hour from Reno with 4 grandkids 🤯🙏 and today the generator started shutting down after about 15 minutes. I noticed my lamp would flicker just before it shuts down any ideas from the group were I should start looking. I think it might be a good idea to find a spot with hook ups tomorrow since it’s snowing again tonight don’t want to kill my new battery’s. Thanks for any suggestions gentlemen. Don

Glad you got it sorted out what a mess. Don

I would think it would have to be something with the Aqua hot it looks like it’s right under it there are a few lines coming out of the AH going to all the heaters. I had a leak like that all I had to do was tighten a hose clamp. Good luck it looks like a mess. Don

Thanks Danny.

Just changed mine a week ago.In my Dynasty it’s the rear ac.

Great bunch of guys on here. Don

Thank you gentlemen. I’m going to harbor freight tomorrow.

Thanks guys for the advice. I’ll try your suggestion.

It’s ceramic. I know I have a water problem of course I just left for a six month trip. I was wondering if there might be a temporary fix? If and when I have to pull that refrigerator I will replace it with a residential one.

Good morning gentlemen. I have a tile coming up that I need to fix,the problem is it’s only half exposed the rest is under a cabinet underneath the refrigerator. I was just wondering if anyone had a trick to fix it with out removing the refrigerator? Thanks in advance. Don

John here are pictures of my 2007 Dynasty steps with plastic bin I would think you have the same setup. Don

Looking good. Don

I ordered a new box should be here by Wednesday. You gentlemen are awesome with your help it was under the drawer. I switched the washer dryer wires and wala . I’m glad I ran into this problem before summer 🥵🥵🥵. I think I kind of knew were the box was from previous post about washing problems. I can’t thank you enough for all your support. I just have a few more things to fix and I’m off to Florida. Don

The thermostat lights. I have the 42 what three are conditions. I only have one air conditioner running on this thermostat. There’s two connections on it one for the washing machine that I do not have and the ac. There’s two connections on the one for the washing machine that I do not have and one for the AC. I can jump it in the air-conditioning will work, but I’m wondering what the washer and dryer connections go to if I just switch them over?

I have no power to my rear AC. I’m trying to find a schematic to find a junction box in my 07 Dynasty I can’t seem to figure out on the website how to get to the schematics, any help would be appreciated. Don

I’m at a shop now doing maintenance and had the same problem it was the ride hight valve. I replaced it everything seems fine now. I haven’t driven it yet . Don

Nice how long did it take him? I am going that way next month.

The only thing I can think of is it’s tweaked maybe try to move the motor home a little bit. Sometimes a door doesn’t want to open because it’s tweaked a little just a guess. Let us know what you find out? Don

As most of you know I just replaced my ATS. I had a bad plug on my watch dog the technician said that might have caused the ATS to go out on me. I contacted Hughes to see if I could just buy a new plug or do I need anew one? I bought my watch dog before I had the motor home because of all the storytelling I read on here. I sent them a picture of the SN and the plug and they sent me a brand name 50A watch dog. Now that’s customer service they replaced it after 3 years. I have a question for you guys? I bought the read out gage for the new ATS so I can get the voltage readings because the new ATS does not communicate with the Aladdin. My question is since there’s a phone connection on the new gauge and on the ATS is there also a phone connector on the monitor for the Aladdin in the dash I could just unplug and plug into the gage so I don’t have to run a new cable? Thanks in advance.Don

He’s in a much better place. Prayers for his family 🙏🙏🙏🙏🙏🙏