Gary M

Thankyou and sorry for your loss also . This girl next to me looks close to Buddy. Yes they are.

Our Moose travels with us also. And now Maggie will too. Although I am looking forward to getting out of the nomad style. To many $$$$$ taking away from taking care of our coach. Needs a lot of TLC.

Wow! Our pup’s ashes will be sprinkled along with my wife’s and mine. Moose with her and Maggie with me. Now Milo we need to figure that one out. But he is definitely my wife’s dog. But he may have 12 more years yet. But do we!!!

Those are really kool. I much appreciate it but we are getting paw print in plaster and a lock of hair and urn. We did the same with her brother. Moose is going with my wife and Maggie with me once we pass.

Thanks for your condolences. 💔 We still have one left. A soon to be 3 yr old terrorist Bichon/ShihTzu (Milo)we got after our Moose (Bichon ) passed in 2020 of which we got Moose because we lost our Malamute (Koko) passed of a stroke 3 weeks before her third birthday and our very first trip in our first motorhome. He may drive me to my grave though. Need to make it to 85 to probably out live him because someone would have to have our patience to take him. Although he has his sweet moments. Ok! 50/50.

We already had an RV when we got Moose and Maggie. But Koko our Malamute we already had when we got our first coach. Unfortunately the first trip out, she had a stroke three weeks before her 4th birthday. A week in intensive care and we had to put her down which led to getting our first Bichon (Moose) a few months later in 2004. Then Maggie in 2008. 2020 Moose passed and I said no more Dogs. Well July 2020 along comes puppy Milo.

Yes they are gut wrenching for all animal lovers.

We lost Moose, Maggie’s older brother in January 2020. Now to lose her too is gut wrenching. But we still have Milo. The only problem is I need to out live him. Can I make it to 85.

I wish Maggie could have lasted longer. 💔. Wow 18!! I feel for u also.

Oh I got one left. And he can be a real SHIT Tzu at times.

Oh I don’t need another as I have one we ( my wife) got when Maggie’s brother died in 2020. I said no more. Yeah right!!! Now I need to live past 85 as he’s a little SHIT Tzu and would take someone vey much like us to handle him.

Had to say goodbye today to my Sweetheart Maggie 💔✝️. Thanks for all the prayers from all last June - Sept. Heart disease hit her hard two days ago and an overnight hospital stay didn’t help. RIP my sweet girl. 05/05/08 - 04/06/23 💔

Went to Samsung RF18 five years ago. No issues.

Mine were tucked into the springs underneath.

If you have Flexsteel Captains Chairs and furniture, Lisa Bauer an ex employee of that company has all the patterns from 2000 and up till Flexsteel quit making RV furniture. She can sew up your pattern, ship it to you and if you have the knowledge, install yourself or find an upholsterer to remove old and install new like we did. We got luck and was within driving distance to take our chairs to also an ex installer employee of Flexsteel. https://bauerrvupholstery.com/

My experience with the one in Boise, Idaho was also not good. Coach was there fore three weeks for a service , radiator clean, ECM report. Somehow they only did the radiator clean and then parked it. After phone tagging over the first two weeks, I had to finally go down and apparently part of the write up was missing and the service manager had been transferred to another facility. It took me another two weeks to get the ECM report as I was handed a 5 page report when I left the state only to find out it should have been 50+ pages.

I got this when I had issues with charging. Don’t know if this is your issue but thought I’d throw it in there. It is available if this is your problem! I think it’s around $175. Mega Tech of Oregon Dual Charger Isolator, MT970 12 Volt Relay Operation Any charging source (shore power, engine alternator, generator, etc.) will charge up both sets of batteries, but the batteries will be isolated during discharge. This helps preserve the ability to start the engine and recharge the entire system even if the house batteries have been discharged. In short, this device performs two functions: 1. It keeps the Chassis and House from discharging each other. 2. If either set of batteries is charging, the second set will also be charging. The following three examples describe what an operator should expect to see under normal operating circumstances: 1. No charging source is connected, but some appliances are running. In this case, the two battery systems will be isolated. One of the battery systems may fully discharge (due to some current draw), but the other battery may still be fresh. 2. One battery is discharged, and the other battery is connected to a charging source. The Dual Charger Isolator will connect the two battery systems in order to charge both of the batteries. 3. Two or more charging sources are connected to the battery systems. The two battery systems will be connected, and the combined current from the two charging systems will charge both the batteries. Additional information of interest: There are two delays and voltage thresholds: 1. There is a sixty second delay where the batteries are disconnected after the ignition is turned on. (This is to keep the engine starter motor from drawing current from the House batteries.) 2. There is a ten-second delay for on/off cycling. Off is below 12.2 volts. On is over 13.0 volts. These ten second delays keep the systems from connecting and disconnecting when there are surge loads for short periods of time that drag down the battery voltage.

I’m also curious as my Throttle Positioning Sensor died back in 2018. But got lucky that Tom Cherry found the pedal and sensor on eBay. They were new with slight damage at connections but ordered, removed old, replaced and plugged in new one and drove back home to Oregon from Ohio.

https://bauerrvupholstery.com/ Lisa has the name of the installer if you go that route. He is in Riverside , California .

I’m curious too as I had new seat covers made by an ex employee of Flexsteel who bought all Flexsteel patterns from 2000 and up. She shipped to us in California at the time an had them installed also by an ex employee of Flexsteel in riverside ca.

Four screws on mine and valance and shade all in one. Take Two on bottom out from valance and two single screws up top into cabinet. Not the ones in the corner brackets as they should only hold valance together. Second pic shows one of the single screws that attach valance to cabinet.

If yours is a Ramco, here’s where I got mine. https://www.ramco-eng.com/

I had same issue. I was told they had my pattern. Got it and was an inch too wide and cover for desk slide didn’t fit. Offered to bring my coach to their shop as I was going to be a couple of miles away. They basically ignored my offer and refunded my money.

Good luck with Shade Pro! Tried several times to get a dash cover. They never could get it right. Got a refund. But that’s just my personal experience.

Is this what u are looking for? It’s a Ramco mirror. I have a spare chrome damaged drivers side mirror with camera. Unfortunately it’s in Oregon and I won’t be back till summer. https://www.ramco-eng.com/