Jump to content

tmw188

Members
  • Posts

    903
  • Joined

  • Last visited

  • Days Won

    4

Everything posted by tmw188

  1. So this is what I did for the freezer cabinet. Same thing I did for the other model I just modified some.
  2. Possibly drums if that’s what you have?
  3. I wonder too if the beads could bunch up some do to condensation in the tire?
  4. Did you use a faucet you typically don’t use?
  5. Sorry I left this post high and dry. I had to replace my fridge while in FL then when I got home busy with many other projects including my Tran cooler failure and and related tranny. Oh yeah a CAC also so the leveling compressor never came back on the radar.
  6. Try asking Google and YouTube and pick out the more professionally feeling video and you’ll probably be able to determine your issue. Check back.
  7. So that red switch on the right, is that the one you replaced? That looks like a A-B switch, which side closes the circuit for that 1 or 2? I guess maybe you could of been using the both position to turn it on? Is that the switch you replaced or the one in question? That should be the Chassis switch.
  8. Did you notice inside the engine door or on the car for fluid residue?
  9. Here is a pic of my 2002 Windsor setup. So was the malfunction you mentioned on your trip what you described in your post or was that what your experiencing since you changed out the switch? It’s just a switch not a A-B switch so you should be able to wire it either way.
  10. Do you think you could sneak in a change at a CG or somewhere else if you could pick some up on the rd? Maybe give Tom at JG a call for his thoughts on changing it now or when you get home. You might not know he was instrumental in the 295 spec. This has got to be driving you crazy, but I would think you’ll be fine.
  11. Jim, were you able to find some Transynd or did you just add some Dextron for now? Just curious.
  12. Yep that’s all you can do. Your in Moab now your climbs are pretty much behind you for the most part, except for the hike up to Delicate Arch!
  13. Maybe when you can crack open the drain plug and drain off a few ounces into a clear cup and take a look for residue and definitely give it a smell test.
  14. What I was trying to express was it doesn’t have to show signs of leaking onto the ground. Yes either the valve or the cylinder seals.
  15. For others mine wasn’t leaking on the ground but was leaking past seals internally somewhere causing it not to stay closed while driving.
  16. Yes it can be done, I got some advice from Jacwjames on removing the parts from the valve block using just a little air pressure while having it wrapped in a towel. Was your slide drifting out while driving? Mine was drifting, no drips and and after removing and taking the parts to a local shop they measured and ordered me the parts for all <$20.
  17. 1.75” thank you, I’m on PSW while driving, in Door Co now and it worked just fine.
  18. The gap is too large there between the two because of the hand hold spacing to open the freezer door. I have my old design that will work I believe.
  19. I bought this for the top doors and I have a old system I’ll use on the bottom. It is plastic but for about $11 for two I’ll give it a go.
  20. Thank you but Way too expensive.
  21. The new rf18 don’t have handles at all unfortunately
  22. I’ve tried Fridge Fixer with no results for the one with the knob? Well I must of visioned something different looking. RV in the search resulted in one for the Samsung but too much money. I have something else coming but that should work.
  23. Haven’t had much luck locating that French door and bottom freezer lock. Fridge Fixer, if I have the name correct.
×
×
  • Create New...