Jump to content

klcdenver

Members
 View Profile  See their activity

  • Posts

    336

  • Joined

  • Last visited

 Content Type 

Everything posted by klcdenver

  1. klcdenver
    I replaced my Norcold 1200 and with a residential fridge. It was working but just not cooling real good in the summer. I prefer to sell whole but will part out. It has the stainless doors and the seals are in pretty good condition. Make offers plus you pay shipping. Send message if interested. Located close to Omaha, NE. Have a nice day.
  2. klcdenver
    Use your jacks and get the front wheel off the ground so you can turn it by hand. If you get the grinding sound you have a bearing bad or brake dragging. The brakes on the roadmaster chassis are known to stick. Sometimes you can drive about a block with the brake partially applied and burn rust or a piece of gravel lodged in the brake. I would try these before going to a shop.
  3. klcdenver
    Open the link below and it will have everything you need to know. I have done it to 2 different diplomats and works great. https://www.irv2.com/forums/f258/gas-door-prop-installed-241214.html
  4. klcdenver
    If you are lucky maybe you only knocked out the start relay. Suggest you go to YouTube and search Samsung start relay. Appliance pro has a short video on this.
  5. klcdenver
    Good luck. You are welcome.
  6. klcdenver
    I think the fridge is plugged into the inverter and when plugged into shore power you don't have inverter selected. Take the outside access panel off behind the fridge and you will have two receptacles plugs there. One for shore and one thru the inverter. Try switching to the other plug or take a meter and check which is hot or not.
  7. klcdenver
    I just replaced mine on a 2007 diplomat. Should be the same size. It is a Gates Green Stripe 24920 are equivalent which I believe is a 1 1/4 ID. Make sure you use a wire spiral wound hose because you do not want it collapse. It is stiff and hard to work with so make sure you order it long enough. I also suggest you order new heavy duty clamps.
  8. klcdenver
    Your motor may be the same as the one of the motors on a different slide. If so you could swap motors to see if that is the culprit prior to just up and buying one. The motor subject to being weak might run a smaller slide ok.
  9. klcdenver
    I am pretty sure your slide is on a geared track and not hydraulic. I know you had motor checked but I think it is weak. Not sure how much torque they are applying and how long they are running the motor. Try pushing from outside with some constant pressure while the DW runs the switch. If it does not stop doing it this way I would change the motor. You would probably get many more suggestions on IRV2. Good Luck
×
×
  • Create New...