Paul Busch

Thank you George

George, Which optiLube are you using?

George, I will order these today and try them. I am here for another week and will make the change. I know I have 10micron on there now. thanks Paul

MY GOODNESS!!! I love this site. Where else can you simply ask a question and people run to your aid. I am going to print and save this one for the future. Thanks David for all the detail. paul

I had trouble with my front air gage on my sig. it started slowly not coming up to pressure then after a few months of only showing a few lbs finally quit. Paul Whittle recommended a gage on eBay and it works fine. Black bezel instead of gold but I can live with that. I had the same leveling issues you are having and with Randy’s help at HWH went through the trouble shooting looking for fuses in several controll box’s and finally replaced the control button panel and all was good instantly. good luck My coach front tank always aired up, the gage just didn’t work. Paul Whittle said don’t bother trying to move back gage to front to try. Different animal’s completely. I drove for about a year without the gage working. Always bothered me but no issues. paul

Thank you Richard. I will do that. paul

Turns out engine check code was failing injector. Still seems to run pretty good. Any additive I can use to improve? Looks like big job to change myself. paul

Thanks Jon, I am just getting around to cleaning grounds this weekend. Paul

I will try to figure this out. It is kind of scary to have iffy headlights. Did you go from the steering wheel controller with the new power line to the headlights?

Dick, I did replace the wheel controller a couple of years ago. I have owned the coach 5 years and when I bought it there were 3 wires that were brown at the controller and seemed to het warm when the light were on. I tested the plug today and only one had a ground and all the time and nothing changed when the lights were switched on. I just put new LED low beams in and got them working again today but not working tonight. I might pick up some regular bulbs and try them tomorrow. paul,

Bill, I did get the part you suggested and just installed it. Same engine light still on. Is there power to this that I can check? Ground or 12 volt positive? I know the level sensor was the plastic one that Monaco used so I was hopeful. thanks Paul

Bill, Thanks, I will limp along for a while to see how it goes.

Thanks, I took it apart and thinking I will not be able to fix it myself. The cable is frayed at the top and bottom latch’s and welded into the latch’s. I screwed the cover on and am going to try to run without it for a while. The front one is still working. I replaced these about 4 years ago and can’t remember but I think I paid 800-1000 for used ones. I did find the stainless cable and sewage sleeves on Amazon. paul

Thanks Vera and Ken

Jim, I do have daytime running lights although they don’t seem to bright. I had replaced the headlight bulbs with LEDs in 2016 and the DS low beam quit working. I just replaced both low beams with newer version of LED from M4 and Steve said the new ones will run on 6volt for DRL which was a problem with the older version. The older version would just flicker with the 6volts provided with DRL. I will try tracing wires and grounds later today. If my light switch was bad the high beams would not work right? The high beams do work. paul Randy, I will look at the dimmer switch also. Thanks 😊 paul

Big help thanks😊

I can’t seem to find anything on Monaco Signature 2005 headlight switch. Having trouble with low beams coming on. Hight beams work? Does anyone know what switch would work? thanks

Ronald, I am not sure what an extend a stay is I installed a adaptor to my sig so I could hook another device to my tank for cooking. I did add another regulator to that and ran a 20’ stainless hose over the tank to the other side. I keep it rolled up on the gas door and run it through the floor to use my griddle. I added quick disconnect to my griddle and cook on PS about 8’ away from coach. I read you need the regulator added or it won’t work. So far about 5monthe working great. I did add shut off at end of hose before adding quick disconnect to hose.

That is good to know, thanks.

Thanks, I will do that. I did look it up on google and think I might be able to do.this.

I will try to replace cable and spring. What is a sledge? paul

I have taken the cover off and removed the slide lock. I haven’t pulled it apart yet but I am sure the cable from the bottom to top is broke.

I am not sure where to post this but does anyone know how to repair or where to get replacement latch ,lock for rear living room driver side slide on 05 Monaco Signature?

Bill, I have a Detroit series 60. I don’t know what you have but do you have a part number? paul

Bill, I will do that when I get to San Antonio. That would be awesome if that is all it. I hope. paul