Paul Busch

If I could have found a Velvac mirror passenger side I probably would have bought it but wasn’t sure which one to get and intec camera on PS didn’t work. I didn’t know then Paul was making plug/play harnesses for replacement cameras. I bought replacement mirrors from 2015 Monaco from Visone used. paul

Paul whittle kindly made me plug and play harness to go from 12 wire mirrors and 3 wire cameras on 05 Monaco to 6 wire mirrors and 4 wire built in camera Ramco. Worked perfectly first time and better than the intec camera.

A semi clipped my passenger mirror and I had to replace both mirrors with Ramco mirrors. I have the 3 mirror Velvac mirror for sale with the intec camera and arm. I painted the arm but mirror is chromed and in nice shape. All 3 mirrors remote and heat work and intec side camera works. I also have the passenger side arm if anyone needs it. Can email pictures if anyone wants. Make me an offer I can’t refuse😊 paul

Paul not only repaired my broken Aladdin Joy stick which I never thought could be done. He also made me 2 wire harnesses to replace my Velvac 3 mirror with Intec side cameras to new Ramco Truvision mirrors with built in cameras in the convex mirror. Plug and play from 12 wire mirrors to 6 wire Ramco mirrors and 3 wire Intec cameras to 4 wire Ramco side cameras. Just got harnesses today and worked perfectly. Can’t thank you enough Paul Amazing stuff

Rvingstuff got your attachment thanks paul

2005 Monaco signature castle 4 thanks

I bought my coach used and never got the owners manual for the outside tv. If you could send me a link to one I would appreciate it.

Good luck. I have 2 but am afraid to part with one?

Not much help I am afraid. Maybe some of the used dealers can help. I have had good luck with Visone.

Sorry no clue, I am sure someone else would help you. This is a great site to get help.

My 05 Sig has a remote to open and close. I don’t know of any other way to move it.

I replaced my Thomas air pump and am not sure if I wired it correctly. The old wires were under coated. I downloaded a wiring diagram off the site but am having trouble tracking it. Does anyone have a better picture of proper wiring. I also had the plastic vent on the older pump and the new old stock came with a solit plate. Does it matter?

I replaced mine for 150 with new ones with bulbs. I had a hard time cleaning up the old ones 2005 Monaco

Nice, thanks

Jim, thanks for the direction. I will try to find this one. big help paul

Jeff, Thanks for the help. Not sure how I missed it but it will work great. Paul

Does anyone know where I can get replacement faucets for instant hot, hot and cold white two handle and brass vanity bath faucet. The cold water faucet on bath faucet started leaking and ink I broke it trying to get apart. If possible I would like to keep as close to original to match hardware and other faucet in other stool area. I can’t see to find white faucet for hot and cold instant hot. There seem to be a lot of single handle ones only for hot. Single handle would be ok if had hot and cold. 2005 Monaco Signature Castle 4 Thanks for your help

I had the same problem 3weeks ago. My front zone was working fine on me 05 sig and then started to blow cold air. I would low cold each time the front zone called for heat. My other 2 zones worked fine and heated well. I pulled the cover off and found a thin power wire to the pump was corroded through at the connection. A new spade connection and every started working again. I did clean the other 3 pumps connections and all is good for now. Good luck. Paul

Thanks for the info

I service mine regularly. Go to RV Hydronic Heater Repair. Rodger Berke has a forum and sells anything and everything you would need. If you join the forum you can ask questions and he responds back to your question on the forum. I have bought parts and motors new and used rebuilt from him and never been disappointed. Good luck

Van, I couldn’t agree more. I am new here only a few days and Paul and the site has already provided me with advise and helped me and I would pay anything for real solutions instead of paying 150.00 an hour for somebody to stand around and scratch their head and me standing around watching them fail at any solution or progress. I have heard so many horror stories and am glad to have people with real solution or learn from their experience. Paul

Thanks, I have been looking for the front gage for 2 years. I just ordered one on eBay. Big help, thanks. paul

Paul, a neighbor in the park with me has the wiring diagram . I will forward it when he gets it for me. I also will look at the Velvac web site to try to find the mirrors. paul

M Paul, I sent photos. Please let me know if you need more. I do feel fortunate to have found this sight. Patty and I bought this coach 5 years ago and put 16,000 miles on it until November 2020. We are now full timing for real and it is great to have so much help with problems. thanks again Paul

Paul, Thanks, do you need me to remove the plug for the cameras and take pictures or just photo of the plug on the harness. This would be so helpful. Would you be able to work out the 3 mirror Velvac 3 mirror 12 plug to the Ramco Truvision 2 mirror 6 plug? Paul 332-237-9811