pwhittle

Sounds more like the 2004 user manual than the 2002. There is likely a fuse in the Front Run Bay that powers one or more things in there. If you touched a live wire to ground, it is very likely one or more fuses blew, but unlikely that you damaged anything. I would start checking to see which of devices has and does not have power on this inputs, then checking for the fuse or other system that feeds that. Paul

Hi Frank, I believe that is the older 10-00849-000 kit. Intellitec now has a new one 10-01079-00 which has a USB connection rather than DB-9 RS-232C connection. These are still available through Intellitec distributors. I do not want to modify the system programming. The new item I am suggesting building would be a new way to turn things on and off from your phone or tablet. Intellitec has a Bluetooth module in their Road Commander line that may work, but they recommended upgrading the whole system from PMC to Road Commander. I will do a proof of concept to confirm I can do it. It may take me some time as I am staying busy at work. Paul

Chad, Are your cameras the bullet style? Do you have an Aladdin system? Does the See Vision system have 12V on the 12V battery terminal and the Aux 12V out connections? Paul

Let’s start with the pictures and see what we can get going again. The 2002 and 2004 Signatures are setup differently so the first thing is to confirm what configuration yours is. The requested photos will help with that. Paul

I have previously been able to backup our Intellitec CPU and confirm I could program a replacement CPU, but this weekend I was successful at backing up our keypads and programming a replacement keypad to address one that would intermittently not work right. All the yellow LED’s would come on and the keys would be unresponsive. Fortunately this was a temporary condition and we were never unable to access the keypad functions for more than a minute or two. Now I do not expect this annoyance to occur. I have also been looking into building a device that would interface with the Intellitec system and allow you to display the status of the system and turn devices on and off using a phone/tablet application. Nothing imminent, but I have been researching what it would take to accomplish this. Is that something that others would be interested in? Paul

@Chad A It will run fine. You just won't have your cameras or other data. I expect we can get you going one way or another. Can you post some pictures of what you are working with, as well as your dash and inside the dash area where the See Vision is, and the rear camera itself, and the relevant sheet from the wiring diagram? There will be a yellow RCA for each camera, and one yellow RCA for each display. Monaco has User Manuals for the 2002 and the 2004 Signature, but not the 2003. What type of cameras are your side cameras? Bullet or Intec box cameras? Do you have an Aladdin system? Paul

Thanks all. Found the blown 2a 12v fuse in the panel near the Intellitec modules. The button needs replacing too, but I can manually short the contacts of the button to make the single Ding! So new doorbell box as well. Paul

I found my doorbell box behind a false wall in the cabinet under the sink in the bedroom. It is a NuTone KB-10WW-1 RevA. It looks like it was stuck on and one of the plungers in inoperative. The other is not conncted. I switched the wire to the other plungers, but it is still not working. Does anyone know where the 16VAC transformer is, or how it is wired to the button and the doorbell? Thanks! Paul

2005 Signature headlights are from a 2003-2006 Ford Expedition. Taillights are from 2003-2006 Chevy Silverado. Paul

One member gave me some feedback on the difficulty they go had getting all the wires into one of the arms. I did another camera for them by cutting most of the cable out. It certainly makes for a shorter cable, but more work to do with the additional cutting and splicing/soldering.

I have replaced relays on various boards. Some are tricky to unsolder, but with the right tools, not too bad. Paul

I upgraded my low beams to HID from 9006 bulbs and they are great. However, it is incompatible its the smartwheel Headlight flash as they do not turn off and on quickly. One trick is to make the wipers sweep once and the smart wheel keeps the low beams on with the high beams. I am now looking at 9011 bulbs to replace the 9005 high beams. Paul

If you have an Aladdin joystick that is non-responsive, I may be able to repair it for you. PM me for details. Alternatively, I would be interested in purchasing (or giving you a credit for) any failed Aladdin joysticks that you may have. PM me for details. Paul

If the two battery banks are joined together while the alternator and the inverter/charger are both charging, the alternator and the inverter/charger are fighting against each other. It is better to disconnect the banks and let the alternator charge the chassis batteries and the inverter/charger charge the house batteries.

A member here sent me a failed Aladdin Joystick that had at some time had the arrow button cap glued to the joystick post, the joystick broken into pieces, and the faceplate had been destroyed. I was able to replace the joystick button and make a new faceplate on the 3D Printer. It works great again, and ready to be put back into service! Paul

Got a call this week from someone with a Tiffin with a Dometic 3300 toilet that wouldn’t operate correctly. I looked up the specs and it has a simplified control board without water level control and different connectors. I felt that my controller was going to be compatible and sent them a controller with some additional connectors so they could cut off the old ones and install the ones I sent them. Today they installed it and it works, and they even have water level control now. This is the old non-working controller. Paul

I spoke to Bill earlier this week. I had asked him for some information, and as always, Bill got me the information I was asking for. That was Bill. We will miss you. Paul

My rear camera still works, but I now see that it needs an update. I did help @Scotty Hutto update the body mounted side cameras on their Diplomat, so got to play with some different cameras. I do plan to do a similar plug and play update for the rear camera.

I made a plug and play cable so I could take the Sony Monitor out of operation. It include a power converter to provide the 8.2V for the Sony rear camera and power the new monitor.

Sent by email! Paul

We are now including an installation manual with the kits with hints and pictures. if anyone else that has a kit wants it, let me know and I can email it to you. Paul

Any future orders now include stainless steel replacement screws and locknuts and a grub screw for the wedge mount that the camera installs in on the mirror. If anyone has received a kit from me and would like the replacement screws, let me know and I will send them to you.

Glendinning support has always been great for me too! Paul

Hi Paul, Can you find a link to the product documentation for your mirrors? Paul

Hi Paul, I expect we can take care of both. Perhaps Velvac has some documentation on their mirrors. Can you try to find that? And welcome to Monacoers! Sorry you had to come here with a problem. Paul